Well, if I go to the folder where EdSharp is installed and enter edsharp.exe followed by a nonexistant filename.txt I get the errors.
I am going to check to see if EdSharp is in my path or not. If not I'll add it and see if that helps. ----- Original Message ----- From: "Jamal Mazrui" <empower@xxxxxxxxx>
To: <programmingblind@xxxxxxxxxxxxx> Sent: Thursday, February 28, 2008 11:02 AM Subject: Re: invoking EdSharp from the command line
This should be possible. Can you give me steps that produce an error? If EdSharp.exe is on the Windows search path or its full path is specified, it can be passed an optional file name on the command line. If the file name includes spaces, then it should be surrounded by quotes (a standard Windows convention). Without dealing with paths, it should also be possible to load EdSharp with the start command, e.g., start edsharp c:\test\temp.txt Jamal On Thu, 28 Feb 2008, DM Beaver wrote:Date: Thu, 28 Feb 2008 10:30:51 -0500 From: DM Beaver <dbeaver888@xxxxxxxxxxxx> Reply-To: programmingblind@xxxxxxxxxxxxx To: programmingblind@xxxxxxxxxxxxx Subject: invoking EdSharp from the command line Hi Jamal, I am curious if there is a (good) way to invoke EdSharp from the commandline? Or perhaps via a bat file? I know this is a arcane way of doing thisbut I have reasons for wanting to do it. ;))i have tried invoking the EdSharp.exe with a filename as a parm but if the file doesn't exist I get errors rather than an unnamed empty edit session.Thanks. ----- Original Message ----- From: "Jamal Mazrui" <empower@xxxxxxxxx> To: <programmingblind@xxxxxxxxxxxxx> Sent: Thursday, February 28, 2008 10:08 AM Subject: Re: edSharp doing odd things with text > If you can find a sequence of steps that reproduces the problem, that > would help me debug it. I suspect the cause is JAWS-related, however,> since others have reported problems with the off screen model of JAWS > 9,> particularly in .NET-based applications. > > So, if I can reproduce the problem and the cause is EdSharp, I will fix > that; if the cause is JAWS, I will try to fix it via the scripts> distributed with EdSharp; and whether the latter case works as a > temporary> solution or not, I encourage folks to let Freedom Scientific know. > Unfortunately, occasional oddities remain in JAWS support for .NET> applications, and the more we let FS know with specific examples, the > more> likely fixes will occur. > > Regards, > Jamal > On Wed, 27 Feb 2008, Alex Hall wrote: > >> Date: Wed, 27 Feb 2008 22:13:12 -0500 >> From: Alex Hall <mehgcap@xxxxxxx> >> Reply-To: programmingblind@xxxxxxxxxxxxx >> To: programmingblind@xxxxxxxxxxxxx >> Subject: edSharp doing odd things with text >> >> I have found that, using edSharp 2.6 on XP with jaws 9, I will >> sometimes be told that text from one or two lines back has been >> printed again. For example, a bit of code (unfinished) was: >> s=in.next(); >> >> [hard return >> >> >> However, edSharp told me that the s=... line had been put where >> I wrote it and then again between the two right braces. Arrowing >> over the area in question one character at a time, between the >> braces, revealed several "blank" characters and an s immediately >> before the final right brace. Not only should that s=... line >> not have been spoken a second time, but arrowing over it one >> character at a time gave different text than did arrowing over it >> one line at a time. I have found that the only way to fix this >> is to restart; alt-tabbing back to it and even closing both >> EdSharp and Jaws does nothing. >> >> Have a great day, >> Alex >> __________ >> View the list's information and change your settings at >> http://www.freelists.org/list/programmingblind >> > __________ > View the list's information and change your settings at > http://www.freelists.org/list/programmingblind > > __________ View the list's information and change your settings at http://www.freelists.org/list/programmingblind__________ View the list's information and change your settings at http://www.freelists.org/list/programmingblind
__________View the list's information and change your settings at http://www.freelists.org/list/programmingblind