Re: Is there a program that will help you create Sapi5 voices?
- From: "alex" <laptop456@xxxxxxxxx>
- To: <programmingblind@xxxxxxxxxxxxx>
- Date: Sat, 6 Oct 2007 09:44:16 -0400
I did it with a laptop and did it. I just nead to learn how to compile it.
----- Original Message -----
From: John Greer
To: programmingblind@xxxxxxxxxxxxx
Sent: Saturday, October 06, 2007 7:46 AM
Subject: Re: Is there a program that will help you create Sapi5 voices?
Well when you start the recorder software, not model talker, you switch jaws
to the jaws cursor. Then make sure the jaws cursor is in unrestricted mode by
pressing insert r until you hear jaws say unrestricted. Next press page up and
arrow down until you here jaws say something like record, playback, next etc.
Then you just press control plus left, right, up or down to line the jaws
cursor up on the button you want. When you find the button you want, most
likely record, press it using num pad slash. When you want to stop recording
the stop button should be somewhere on the same line as the record button so
just control left or right arrow until you here jaws say stop and press the num
pad slash key. I did not give any instructions on how to do this using a
laptop because they don't recommend using the software with a laptop. Also it
will make things a bit easier if you maximize the window before you do any of
the steps above. This can be done by pressing alt space bar, then pressing the
letter x.
----- Original Message -----
From: alex
To: programmingblind@freelistsorg
Sent: Saturday, October 06, 2007 6:08 AM
Subject: Re: Is there a program that will help you create Sapi5 voices?
How should i get the curser to the record button? The jaws curser only
reads from what i thought.
----- Original Message -----
From: John Greer
To: programmingblind@freelistsorg
Sent: Friday, October 05, 2007 11:38 PM
Subject: Re: Is there a program that will help you create Sapi5 voices?
There are some but they are not documented for the model talker player.
However to use the recording part of it you will have to use the jaws cursor.
----- Original Message -----
From: alex
To: programmingblind@freelistsorg
Sent: Friday, October 05, 2007 10:16 PM
Subject: Re: Is there a program that will help you create Sapi5 voices?
For a blind person, is there Jaws scripts for model talker?
Because I understand it now but just nead some scripts or shortcut keys.
----- Original Message -----
From: John Greer
To: programmingblind@freelistsorg
Sent: Friday, October 05, 2007 8:37 PM
Subject: Re: Is there a program that will help you create Sapi5
voices?
Other than model talker I don't know of any. However I may be able
to point you to a person that can help. He is the developer of the E Speak
text to speech voice that is used with the NVDA screen reader. The address to
his site is http://espeak.sourceforge.net/
----- Original Message -----
From: alex
To: programmingblind@freelistsorg
Sent: Friday, October 05, 2007 5:09 PM
Subject: Is there a program that will help you create Sapi5 voices?
Well I was wondering,
Is there a program that will help you create Sapi5 voices?
Like something that you speak a number of letters into a microphone
then it gets an understanding of your voice and creates a sapi5 engine out of
it?
Other related posts:
