[pisa-src] autobuild failed: @make output:

  • From: "pisa.auto pisa.auto" <heer@xxxxxxxxxxxxxxxxx>
  • To: pisa-src@xxxxxxxxxxxxx
  • Date: Sat, 07 Nov 2009 22:38:01 +0100

make[1]: Entering directory `/srv/home/pisa.auto/autobuild/openwrt'
make[2]: Entering directory `/srv/home/pisa.auto/autobuild/openwrt/package/pisa'
gzip -dc /srv/home/pisa.auto/autobuild/openwrt/dl/pisa-0.0.1581.tar.gz | 
/bin/tar -C 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/..
 -xf - 
touch 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/.prepared_61e4b3fc95a4f056f0b4678f083162c1
AR=mipsel-openwrt-linux-uclibc-ar AS="ccache mipsel-openwrt-linux-uclibc-gcc -c 
-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float" 
LD=mipsel-openwrt-linux-uclibc-ld NM=mipsel-openwrt-linux-uclibc-nm CC="ccache 
mipsel-openwrt-linux-uclibc-gcc" GCC="ccache mipsel-openwrt-linux-uclibc-gcc" 
CXX="mipsel-openwrt-linux-uclibc-g++" RANLIB=mipsel-openwrt-linux-uclibc-ranlib 
STRIP=mipsel-openwrt-linux-uclibc-strip 
OBJCOPY=mipsel-openwrt-linux-uclibc-objcopy 
OBJDUMP=mipsel-openwrt-linux-uclibc-objdump 
SIZE=mipsel-openwrt-linux-uclibc-size CFLAGS="-Os -pipe -mips32 -mtune=mips32 
-funit-at-a-time -fhonour-copts -msoft-float " CXXFLAGS="-Os -pipe -mips32 
-mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float " 
CPPFLAGS="-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 -I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolch!
 ain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 " 
LDFLAGS="-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/lib
 "  LIBS="-lm" CPPFLAGS="$CPPFLAGS 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include";
(cd 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/./;
 if [ -x ./configure ]; then /usr/bin/find 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/
 -name config.guess | xargs -r chmod u+w; /usr/bin/find 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/
 -name config.guess | xargs -r -n1 cp 
/srv/home/pisa.auto/autobuild/openwrt/scripts/config.guess; /usr/bin/find 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/
 -name config.sub | xargs -r chmod u+w; /usr/bin/find 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/
 -name config.sub | xargs -r -n1 cp 
/srv/home/pisa.auto/autobuild/openwrt/scripts/config.sub; 
AR=mipsel-openwrt-linux-uclibc-ar AS="ccache mipsel-openwrt-linux-uclibc-gcc -c 
-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float" 
LD=mi!
 psel-openwrt-linux-uclibc-ld NM=mipsel-openwrt-linux-uclibc-nm CC="ccache 
mipsel-openwrt-linux-uclibc-gcc" GCC="ccache mipsel-openwrt-linux-uclibc-gcc" 
CXX="mipsel-openwrt-linux-uclibc-g++" RANLIB=mipsel-openwrt-linux-uclibc-ranlib 
STRIP=mipsel-openwrt-linux-uclibc-strip 
OBJCOPY=mipsel-openwrt-linux-uclibc-objcopy 
OBJDUMP=mipsel-openwrt-linux-uclibc-objdump 
SIZE=mipsel-openwrt-linux-uclibc-size CFLAGS="-Os -pipe -mips32 -mtune=mips32 
-funit-at-a-time -fhonour-copts -msoft-float " CXXFLAGS="-Os -pipe -mips32 
-mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float " 
CPPFLAGS="-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 " LDFLAGS=!
 "-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uCl
ibc-0.9.30.1/usr/lib 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/lib
 "  LIBS="-lm" CPPFLAGS="$CPPFLAGS 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include"
  ./configure --target=mipsel-openwrt-linux --host=mipsel-openwrt-linux 
--build=i486-linux-gnu --program-prefix="" --program-suffix="" --prefix=/usr 
--exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/lib 
--sysconfdir=/etc --datadir=/usr/share --localstatedir=/var --mandir=/usr/man 
--infodir=/usr/info --disable-nls  --disable-ipv6  --host=mipsel-openwrt-linux 
--target=mipsel-openwrt-linux --enable-openwrt ; fi; );
configure: WARNING: unrecognized options: --disable-nls, --disable-ipv6
configure: loading site script 
/srv/home/pisa.auto/autobuild/openwrt/include/site/mipsel-openwrt-linux-uclibc
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for mipsel-openwrt-linux-strip... mipsel-openwrt-linux-uclibc-strip
checking for mipsel-openwrt-linux-gcc... ccache mipsel-openwrt-linux-uclibc-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether ccache mipsel-openwrt-linux-uclibc-gcc accepts -g... yes
checking for ccache mipsel-openwrt-linux-uclibc-gcc option to accept ISO C89... 
none needed
checking for style of include used by make... GNU
checking dependency style of ccache mipsel-openwrt-linux-uclibc-gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking build system type... i486-pc-linux-gnu
checking host system type... mipsel-openwrt-linux-gnu
checking for a sed that does not truncate output... 
/srv/home/pisa.auto/autobuild/openwrt/staging_dir/host/bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by ccache mipsel-openwrt-linux-uclibc-gcc... 
mipsel-openwrt-linux-uclibc-ld
checking if the linker (mipsel-openwrt-linux-uclibc-ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... 
mipsel-openwrt-linux-uclibc-nm
checking the name lister (mipsel-openwrt-linux-uclibc-nm) interface... BSD nm
checking the maximum length of command line arguments... 98304
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for mipsel-openwrt-linux-uclibc-ld option to reload object files... -r
checking for mipsel-openwrt-linux-objdump... mipsel-openwrt-linux-uclibc-objdump
checking how to recognize dependent libraries... pass_all
checking for mipsel-openwrt-linux-ar... mipsel-openwrt-linux-uclibc-ar
checking for mipsel-openwrt-linux-strip... (cached) 
mipsel-openwrt-linux-uclibc-strip
checking for mipsel-openwrt-linux-ranlib... mipsel-openwrt-linux-uclibc-ranlib
checking command to parse mipsel-openwrt-linux-uclibc-nm output from ccache 
mipsel-openwrt-linux-uclibc-gcc object... ok
checking how to run the C preprocessor... ccache 
mipsel-openwrt-linux-uclibc-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if ccache mipsel-openwrt-linux-uclibc-gcc supports -fno-rtti 
-fno-exceptions... no
checking for ccache mipsel-openwrt-linux-uclibc-gcc option to produce PIC... 
-fPIC -DPIC
checking if ccache mipsel-openwrt-linux-uclibc-gcc PIC flag -fPIC -DPIC 
works... yes
checking if ccache mipsel-openwrt-linux-uclibc-gcc static flag -static works... 
yes
checking if ccache mipsel-openwrt-linux-uclibc-gcc supports -c -o file.o... yes
checking if ccache mipsel-openwrt-linux-uclibc-gcc supports -c -o file.o... 
(cached) yes
checking whether the ccache mipsel-openwrt-linux-uclibc-gcc linker 
(mipsel-openwrt-linux-uclibc-ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking for pow in -lm... yes
checking for DSA_generate_key in -lcrypto... yes
checking for config_setting_index in -lconfig... yes
checking for pthread_create in -lpthread... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether to have verbose debug... yes
checking whether to use performance measurement... no
checking whether to use logging... no
checking whether to use OpenWRT... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --disable-nls, --disable-ipv6
touch 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/.configured_
(AR=mipsel-openwrt-linux-uclibc-ar AS="ccache mipsel-openwrt-linux-uclibc-gcc 
-c -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time -fhonour-copts 
-msoft-float" LD=mipsel-openwrt-linux-uclibc-ld 
NM=mipsel-openwrt-linux-uclibc-nm CC="ccache mipsel-openwrt-linux-uclibc-gcc" 
GCC="ccache mipsel-openwrt-linux-uclibc-gcc" 
CXX="mipsel-openwrt-linux-uclibc-g++" RANLIB=mipsel-openwrt-linux-uclibc-ranlib 
STRIP=mipsel-openwrt-linux-uclibc-strip 
OBJCOPY=mipsel-openwrt-linux-uclibc-objcopy 
OBJDUMP=mipsel-openwrt-linux-uclibc-objdump 
SIZE=mipsel-openwrt-linux-uclibc-size CFLAGS="-Os -pipe -mips32 -mtune=mips32 
-funit-at-a-time -fhonour-copts -msoft-float " CXXFLAGS="-Os -pipe -mips32 
-mtune=mips32 -funit-at-a-time -fhonour-copts -msoft-float " 
CPPFLAGS="-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 -I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolc!
 hain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 " 
LDFLAGS="-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/lib
 
-L/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/lib
 "  LIBS="-lm" CPPFLAGS="$CPPFLAGS 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include"
 make -C 
/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581);
make[3]: Entering directory 
`/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581'
make  all-am
make[4]: Entering directory 
`/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581'
depbase=`echo libpisa/arp.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
        /bin/bash ./libtool --tag=CC   --mode=compile ccache 
mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I.   
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
  
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -!
 msoft-float  -MT libpisa/arp.lo -MD -MP -MF $depbase.Tpo -c -o libpisa/arp.lo 
libpisa/arp.c &&\
        mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  ccache mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I. 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -msoft-float -MT libpisa/arp.lo !
 -MD -MP -MF libpisa/.deps/arp.Tpo -c libpisa/arp.c -o libpisa/arp.o
depbase=`echo libpisa/cfg.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
        /bin/bash ./libtool --tag=CC   --mode=compile ccache 
mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I.   
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
  
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -!
 msoft-float  -MT libpisa/cfg.lo -MD -MP -MF $depbase.Tpo -c -o libpisa/cfg.lo 
libpisa/cfg.c &&\
        mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  ccache mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I. 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -msoft-float -MT libpisa/cfg.lo !
 -MD -MP -MF libpisa/.deps/cfg.Tpo -c libpisa/cfg.c -o libpisa/cfg.o
depbase=`echo libpisa/conmgr.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
        /bin/bash ./libtool --tag=CC   --mode=compile ccache 
mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I.   
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
  
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -!
 msoft-float  -MT libpisa/conmgr.lo -MD -MP -MF $depbase.Tpo -c -o 
libpisa/conmgr.lo libpisa/conmgr.c &&\
        mv -f $depbase.Tpo $depbase.Plo
libtool: compile:  ccache mipsel-openwrt-linux-uclibc-gcc -DHAVE_CONFIG_H -I. 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/usr/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/toolchain-mipsel_gcc-4.1.2_uClibc-0.9.30.1/include
 
-I/srv/home/pisa.auto/autobuild/openwrt/staging_dir/target-mipsel_uClibc-0.9.30.1/usr/include/libconfig
 
-I/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/include
 -std=gnu99 -Wall -Wextra -Wredundant-decls -Wstrict-prototypes 
-Wdisabled-optimization -Wpointer-arith -Wundef -Winline 
-Wno-deprecated-declarations -Wmissing-prototypes -Wwrite-strings -Wcast-qual 
-Wshadow -Werror -Os -pipe -mips32 -mtune=mips32 -funit-at-a-time 
-fhonour-copts -msoft-float -MT libpisa/conmgr.!
 lo -MD -MP -MF libpisa/.deps/conmgr.Tpo -c libpisa/conmgr.c -o libpisa/conmgr.o
cc1: warnings being treated as errors
libpisa/conmgr.c: In function 'pisa_conmgr_add':
libpisa/global.h:232: warning: inlining failed in call to 'pisa_ipv6_copy': 
--param max-inline-insns-single limit reached
libpisa/conmgr.c:109: warning: called from here
libpisa/global.h:232: warning: inlining failed in call to 'pisa_ipv6_copy': 
--param max-inline-insns-single limit reached
libpisa/conmgr.c:117: warning: called from here
make[4]: *** [libpisa/conmgr.lo] Error 1
make[4]: Leaving directory 
`/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581'
make[3]: *** [all] Error 2
make[3]: Leaving directory 
`/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581'
make[2]: *** 
[/srv/home/pisa.auto/autobuild/openwrt/build_dir/target-mipsel_uClibc-0.9.30.1/pisa-0.0.1581/.built]
 Error 2
make[2]: Leaving directory `/srv/home/pisa.auto/autobuild/openwrt/package/pisa'
make[1]: *** [package/pisa/install] Error 2
make[1]: Leaving directory `/srv/home/pisa.auto/autobuild/openwrt'
make: *** [package/pisa-install] Error 2

Other related posts: