-=PCTechTalk=- Re: scrWill look at the cords, now I see no typing whatsoever.een going crazy again
- From: Gman <gman.pctt@xxxxxxxxx>
- To: <pctechtalk@xxxxxxxxxxxxx>
- Date: Mon, 16 Feb 2009 21:57:45 -0500
It needs to be taken apart to check the backlight. Squeezing the sides may
have made the contact at one end of one of the backlight lamps improve.
Only a monitor specialist would be able to answer any more detailed
questions than that. If the monitor is still under waranty, get in touch
with the maker and request an RA (return authorization) so they can test it
for you. If it's defective, it will likely be replaced without charge. If
it's no longer under waranty, you can use their web site to find the
authorized repair place nearest you.
Peace,
Gman
http://www.bornagainamerican.org
"The only dumb questions are the ones we fail to ask"
----- Original Message -----
From: "cristy" <poppy0206@xxxxxxxxxxxxx>
To: <pctechtalk@xxxxxxxxxxxxx>
Sent: Monday, February 16, 2009 8:46 PM
Subject: -=PCTechTalk=- Re: scrWill look at the cords, now I see no typing
whatsoever.een going crazy again
> Hhi Gman,
>
> It is a flat screen, so I guess LCD. It is not a CRT. How would I check
> to
> see if it is a bad back light? I did not smell anything electrical.
> Would
> holding the sides of the monitor and squeezing them lightly cause me to
> see
> everything better again? Also why would it turn blackish at one corner.
> This monitor is working fine I borrowed. Also using a different power
> cord
> with it.
>
> thanks,
>
>
> Christy
---------------------------------------------------------------
Please remember to trim your replies (including this sentence and everything
below it) and adjust the subject line as necessary.
To unsubscribe or change your email settings:
//www.freelists.org/webpage/pctechtalk
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
//www.freelists.org/archives/pctechtalk/
To contact only the PCTT Mod Squad, write to:
pctechtalk-moderators@xxxxxxxxxxxxx
To join the PCTableTalk off-topic group, send a blank email to:
pctabletalk+subscribe@xxxxxxxxxxxxxxxx
---------------------------------------------------------------
Other related posts:
