-=PCTechTalk=- Re: PC to cell phone problem
- From: "ml" <my2punkin@xxxxxxxxxxx>
- To: <pctechtalk@xxxxxxxxxxxxx>
- Date: Fri, 26 Sep 2008 18:01:42 -0700
I did just what was on the e-mail you sent and all I got was "there was an
error with your instalation. then it asks do I want to add more units (
apparently the one that is listed is not right) and even when I say yes and
it goes into that mode it STILL comes back the same..there was an error
blahhhhhhh. I even used the disk that came with the cord...I feel like
shooting it...hisssssssssssssssssssssss. Done this 6 times with 3 cds and
always the same results....
----- Original Message -----
From: "Gman" <gman.pctt@xxxxxxxxx>
To: <pctechtalk@xxxxxxxxxxxxx>
Sent: Friday, September 26, 2008 5:07 PM
Subject: -=PCTechTalk=- Re: PC to cell phone problem
> ML,
> These are the setup instructions according to the website.
>
> A. Installing the software on your compter:
>
> MPT version 4:
> Install Motorola Phone Tools (MPT) v.4 following the steps outlined in the
> MPT Installation & Setup Manual.
>
> MPT version 5:
> Install Motorola Phone Tools (MPT) v.5 following the steps outlined in the
> MPT Installation & Setup Manual.
>
> B. Configuring your mobile device:
>
> Note: The phone setup wizard will automatically start after the
> installation
> of the MPT software.
>
> 1.. Launch MPT.
> 2.. Select a "Profile" and click OK. The phone setup wizard will
> automatically start.
> Note: You should create different profiles when connecting multiple
> phones.
> 3.. Choose your connection type and click Next.
> Important: Please do not connect your phone to the PC until instructed by
> the phone setup wizard.
> Note: Set the phone's USB connection to "Data/Fax Connection" when
> connecting with a USB cable.
> 4.. Follow the on-screen instructions to connect your phone to the PC.
> 5.. Your phone will display once a connection has been established.
>
> I noticed that there's a line saying to NOT connect the phone until
> instructed and wonder if maybe you connected it too soon. The phone's USB
> connection also must be set a certain way and maybe that's the holdup
> here.
>
> Peace,
> Gman
>
> "The only dumb questions are the ones we fail to ask"
>
> ----- Original Message -----
> From: "ml" <my2punkin@xxxxxxxxxxx>
> To: <pctechtalk@xxxxxxxxxxxxx>
> Sent: Friday, September 26, 2008 10:52 AM
> Subject: -=PCTechTalk=- Re: PC to cell phone problem
>
>
>> It's a Motorola MotoRAZR v3xx...I have the cable and the Motorola Phone
>> Tools 4. It's the same software that I had with my other phone but it
>> updated as soon as it was installed. I think it would work if if Win
>> would
>> recognize the phone.
>
> ---------------------------------------------------------------
> Please remember to trim your replies (including this sentence and
> everything below it) and adjust the subject line as necessary.
>
> To unsubscribe or change your email settings:
> //www.freelists.org/webpage/pctechtalk
>
> To access our Archives:
> http://groups.yahoo.com/group/PCTechTalk/messages/
> //www.freelists.org/archives/pctechtalk/
>
> To contact only the PCTT Mod Squad, write to:
> pctechtalk-moderators@xxxxxxxxxxxxx
>
> To join the PCTableTalk off-topic group, send a blank email to:
> pctabletalk+subscribe@xxxxxxxxxxxxxxxx
> ---------------------------------------------------------------
>
---------------------------------------------------------------
Please remember to trim your replies (including this sentence and everything
below it) and adjust the subject line as necessary.
To unsubscribe or change your email settings:
//www.freelists.org/webpage/pctechtalk
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
//www.freelists.org/archives/pctechtalk/
To contact only the PCTT Mod Squad, write to:
pctechtalk-moderators@xxxxxxxxxxxxx
To join the PCTableTalk off-topic group, send a blank email to:
pctabletalk+subscribe@xxxxxxxxxxxxxxxx
---------------------------------------------------------------
Other related posts:
