-=PCTechTalk=- Re: Any advice?

 Thanks Robert.
 
-------Original Message-------
 
From: Robert Andrew Dulaney Jr.
Date: 03/31/06 03:57:05
To: pctechtalk@xxxxxxxxxxxxx
Subject: -=PCTechTalk=- Re: Any advice?
 
install OS then drivers fron the MOBO CD after you are up and running you
can check for updated drivers etc.
  don't touch the top of the CPU when installng. Stay grounded  good luck
Jo Ann Weaver <bookworm54@xxxxxxxxxx> wrote:
  Getting ready to put together my first computer from scratch. That is as
soon as I run and get a heatsink and fan for the CPU which I forgot to order
Power supply is already in case. Thought I would mount the CPU on the mobo
before I put it in the case. Then plug in power and other wires (other
first ) to board. Then install and plug in drives, install RAM last. Want to
add video card later, but will use built in to get it up and running. Have
installed drives and cards before, but this is my first mobo. When do I use
the CD that comes with the board? Can I use it before I load WinXP? I'm a
little nervous about the wires.
 
Jo Ann
--
 
 
 
To unsub or change your email settings:
http://www.freelists.org/webpage/pctechtalk
 
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
http://www.freelists.org/archives/pctechtalk/
 
 
 
 
 
---------------------------------
How low will we go? Check out Yahoo! Messenger?s low  PC-to-Phone call rates

 
--
<Please delete this line and everything below.>
 
To unsub or change your email settings:
http://www.freelists.org/webpage/pctechtalk
 
To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
http://www.freelists.org/archives/pctechtalk/
 
 
--
<Please delete this line and everything below.>

To unsub or change your email settings:
http://www.freelists.org/webpage/pctechtalk

To access our Archives:
http://groups.yahoo.com/group/PCTechTalk/messages/
http://www.freelists.org/archives/pctechtalk/

Other related posts: