[pchelpers] Re: printing problem reply on Epson

Hmmm. If the missing bit was all the way across, it would be a non 
working jet on the head or similar. This was common among dot matrix 
printers when one head pin got stuck. If it is only part way across the 
page, then it is more likely an uneven distance between page and head. 
It that case, check the following:

1) Paper stuck in the mechanism or paper train.
2) Feeder out of position.
3) Paper loading not correct- paper may not be held properly for 
feeding. Check levers, clips etc.
Look very closely and let us know what you find.

Louis M Hall wrote:

>Scott, Robert and John, I appreciate your advice and as always look
>forward to keeping up with PC Helper.
>
>Most recently my print problem has been that one or two lines appear to
>have part of the horizontal of one line missing, all the way from left to
>right. I let my warranty expire as printing has improved since I make it a
>point to
>at least print something every day. 
>
-- 
Regards, John Durham <http://modecideas.com/contact.html?sig>
ICQ number 112663246
Fax/Phone 64 4 5286786
Award winning web site at http://modecideas.com?sig
Order my latest e-book at http://modecideas.com/dmaxhits.htm?sig
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Good advice is like good paint- it only works if applied.



Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at http://www.freelists.org/cgi-bin/lsg2.cgi
List archives at http://www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Good advice is like good paint- it only works if applied.

Other related posts: