[pchelpers] Re: pin out

Dallas, which MB is it?
try this, most are the same,    cable colours to pins...........red = 
usb5/6+     white =  usbp_5/6-       green = usbp_5/6 +    black = gnd
There may be a pin at the end, that is not used.

Billy

----- Original Message ----- 
From: "Nigel" <one2onewebs@xxxxxxxxxxxxxx>
To: <pchelpers@xxxxxxxxxxxxx>
Sent: Saturday, January 28, 2006 10:01 AM
Subject: [pchelpers] Re: pin out


> Hi PC
>> I'm putting in my new motherboard and ran into a problem.
>> On my board the USB pin outs are:
>>
>> 1 power
>> 2 power
>> 3 usbdx-
>> 4 usbdy-
>> 5 usbdx+
>> 6 usbdy+
>> 7 GND
>> 8 GND
>> 9 no pin
>> 10 NC
>>
>> My cable from the front panel USB ports are labeled:
>>
>> data +1
>> data -1
>> vcc
>> GND
>>
>> So which cable do I plug into which pin?
>>



-- 
-------list-services-below-----------
Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at http://www.freelists.org/cgi-bin/lsg2.cgi
List archives at http://www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Latest news live feeds at http://modecideas.com/indexhomenews.htm?sig
Good advice is like good paint- it only works if applied.

Other related posts: