[pchelpers] hp 990 cse printer

I noticed my printed had a red error light on it yesterday <the kind you 
get when you need to add paper and so forth> but I was too busy to check 
it out.

This morning the printer was on.  I printed out one page before I left.  
Then I noticed the printer was off and I thought it odd because I didn't 
remember turning it off.

Tonight after work it was still off. 

Long story short, I unplugged it, moved it to the living room and 
plugged it in.  Still 'off'.  No power.  We put alcohol on the contacts 
of the power cord and used some air on that same cord.  If we put it in 
all the way, it would not come on.  If we plugged the power cord into 
the printer and then backed off slightly with it, it would come on.  Not 
to stay though.  For less than 10 minutes each time.  :(

We did this for 30 minutes or more.  Could get it to come on for a few 
minutes, then it would go off again.

We are thinking it is either 1. the power cord needs replacing, or 2. 
something happened to the contacts.  I hope it is something fixable as I 
really like my printer. 

Suggestions anyone?

Re-Na


-- 
-------list-services-below-----------
Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at http://www.freelists.org/cgi-bin/lsg2.cgi
List archives at http://www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Latest news live feeds at http://modecideas.com/indexhomenews.htm?sig
Good advice is like good paint- it only works if applied.

Other related posts: