[pchelpers] Re: can't move files (fixed maybe)

Looks like I may have fixed it for now.

I was going through the advance properties of both lan ports to make
sure they both had the same settings.

I notice that on computer 1 the "speed/duplex setting" was set
for "Autonegotiate for 1000FD only"

On computer two it was set for "Full Autonegotiation"
Computer two didn't have a 1000FD setting. only 10 and 100.

I re-set computer 1 to "Full Autonegotiation" and now transfers
are working but slowly since it is now connecting at 100 Mbps
instead of the 1000 Mbps that I'm use to.

Both of the lan ports on computer 2 are 1 gig ports.
I seen this once before.
I was running a Motherboard with a 1 gig port and I had the option
to set it at 1000 FD only.
Then nVidia came out with new drivers and once I installed them
the port lost the 1000 Mbps option. Had to go back to the older
drivers to get it back.

Looks like I have to find my old nVidia drivers and see if the 1000 Mbps
option appears on this board.

Pc


-- 
-------list-services-below-----------
Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at http://www.freelists.org/cgi-bin/lsg2.cgi
List archives at http://www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Latest news live feeds at http://modecideas.com/indexhomenews.htm?sig
Good advice is like good paint- it only works if applied.

Other related posts: