[pchelpers] Re: Up and running

> Everything seemed fine,the paste seemed a little disturbed when I took off 
> the fan but nothing out of the ordinary.As I say, it gaveme an excuse to 
> update.

Billy
> That was likely to fix it. In some cases (such as the motherboard that
> now runs my web server), this problem was due to a worn out fan bearing.
> In other cases it has been caused by loss of thermal conduct between the
> chip and the heat sink. Did you check those before replacing?
>
> -- 
> Regards, John Durham <http://modecideas.com/contact.html?sig>



-- 
-------list-services-below-----------
Regards, John Durham (list moderator) <http://modecideas.com/contact.html?sig>
Freelists login at http://www.freelists.org/cgi-bin/lsg2.cgi
List archives at http://www.freelists.org/archives/pchelpers
PC-HELPERS list subscribe/unsub at http://modecideas.com/discuss.htm?sig
Latest news live feeds at http://modecideas.com/indexhomenews.htm?sig
Good advice is like good paint- it only works if applied.

Other related posts: