[pcductape] Re: transfer of files

  • From: "Emery, David" <demery@xxxxxxxxxxxxxxxxx>
  • To: "'pcductape@xxxxxxxxxxxxx'" <pcductape@xxxxxxxxxxxxx>
  • Date: Fri, 16 May 2003 10:55:47 -0400

I agree with you Pam, didn't mean to imply otherwise, I just find sometimes
it is easier to provide a document that leads them through the steps and its
faster. :>) Dave
-----Original Message-----
From: Pam [mailto:ltf01@xxxxxxxxxx]
Sent: Friday, May 16, 2003 10:46 AM
To: pcductape@xxxxxxxxxxxxx
Subject: [pcductape] Re: transfer of files

I had 2 boxes connected with a crossover for the longest time before I got a
switch to hook up 4 machines.  That's how I viewed/transferred/opened files
on the other machine.  As long as the network connection between the 2
machines is working then you should be able to do as I suggested.  

See attached. I have not checked the links lately,  Dave

Hi Pam,
The two computers are not networked as via cable via modem but are connected
by crossover cable which are plugged into the network cards.   Unit 1 is the
unit that is host from the cable modem but I unpluged the cable from the
modem.   But you do raise an interesting point.   I wonder if I can use
Explorer on both computers to see each other via the crossover cable.   I'll
try it tonight when I get home from the office.
Thanks for the suggestion.

Hi Carl,
If the network is running properly, and if you only want to transfer 1 file
(but you aren't limited to transferring only 1 file), you can do it from  an
Explorer Window (right click on Start and choose Explorer).

Hi Group,
I am trying to transfer files from computer B (old unit with 4gig) to
computer A (new unit with 60gig) and I am stumped.   I purchased a crossover
cable and connected the 2 computers by Network cards and followed the
instructions under Start-Programs-Accessories-System Tools-Files & Settings
Transfer Wizard and after about an hour, the old computer unit B gives me a
message that it cannot continue because of insufficient space.     The
process on unit B was "Preparing for Transfer" and that is what took an
hour.   How do I transfer just 1 folder?    The error message indicated that
it was "backing up".   Why?

Other related posts: