If you connect directly to your cable connection and run IPCONFIG /all at the prompt, run cmd from start\run and then the command and you can obtain your gateway, DNS etc that you will need to enter for your VPN. -----Original Message----- From: Scott McNay [mailto:Wizard@xxxxxxxx] Sent: Saturday, April 19, 2003 4:27 PM To: Emery, David Subject: [pcductape] Re: VPN Hello David, Saturday, April 19, 2003, 11:21:29 AM, you wrote: ED> Scott: It sounds like you need to be a member of your Friends machine and ED> vice-versus and you may have to put DNS settings in for Internet to work. ED> Are you using the same workgroup name? It appears most of the things are ED> dealing with security and profiles have to reflect authorization in the ED> users group. Dave My web access works fine when the VPN connection isn't active. Since I have a cable connection already, internet access via the VPN connection would be a bit counterproductive. If it's possible to have it both ways, I'd like to know how it's done. My co-worker was able to access my files just fine last night, and I haven't changed any security settings in Windows; I've only tinkered with the connection, firewall, and router settings, to tighten things down. I don't see any of them allowing him to see my files but not be able to do anything with them, though. -- Best regards, Scott mailto:Wizard@xxxxxxxx To unsubscribe from this list send an email to pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the Web interface. To unsubscribe from this list send an email to pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field OR by logging into the Web interface.