[pcductape] Re: Interrupt usage

  • From: "Bob Noble" <bnoble@xxxxxxxxx>
  • To: <pcductape@xxxxxxxxxxxxx>
  • Date: Fri, 7 Feb 2003 23:10:01 -0800

Hi Pam,
Can you get into the bios ok?
You need to go in there and disable com port 2 and one if your mouse isn't using
it.
I think the setting is in peripherals.
This will free up one or two interrupts.

Bob Noble
www.sonic.net/bnoble
----- Original Message -----
From: "Pam" <ltf01@xxxxxxxxxx>
To: <pcductape@xxxxxxxxxxxxx>
Sent: Friday, February 07, 2003 5:41 AM
Subject: [pcductape] Re: Interrupt usage


| How fast is "really fast"?  This is an Athlon 933.
|
| I replaced the new nic into the same slot the old nic was working in.  My
| reasoning was that if the old one worked fine from there then the new one
| should too.
|
| >
| >
| >Hi Pam,
| >I don't like what I see on the interrupts.
| >You are really using 11 heavily.
| >This might be ok on a really fast computer, but maybe we need to
| >do some work to
| >improve this.
| >
| >Let's keep it in mind and work on it after we view the rest of the things.
| >
| >Bob Noble
| >www.sonic.net/bnoble
| >----- Original Message -----
| >From: "Pam" <ltf01@xxxxxxxxxx>
| >To: <pcductape@xxxxxxxxxxxxx>
| >Sent: Friday, February 07, 2003 12:12 AM
| >Subject: [pcductape] Re: Interrupt usage
| >
| >
| >| Found it.  Never looked at this on the 2k box before.  Though 11
| >is busy it
| >| shows no conflicts.  hmmmmm
| >|
| >| >
| >| >
| >| >Hi Pam,
| >| >Also, can you send a shot of the interrupt usage of all devices
| >on the 2k
| >| >machine.
| >| >I think you can get it in device manager.
| >| >
| >| >Bob Noble
| >|
| >
| >To unsubscribe from this list send an email to
| >pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
| >OR by logging into the Web interface.
| >
|
| To unsubscribe from this list send an email to
| pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
| OR by logging into the Web interface.
|

To unsubscribe from this list send an email to
pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
OR by logging into the Web interface. 

Other related posts: