[pcductape] Re: HTML Test 2 now networking with Win2k

  • From: "Huntress" <thehuntress@xxxxxxxxx>
  • To: <pcductape@xxxxxxxxxxxxx>
  • Date: Mon, 30 Dec 2002 04:28:36 -0500

Content-Type: text/plain;
        charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

I'm sending this on behalf of Scott McNay:

You probably need to redo the ICS on the Win2K box.  ICS is bound to a
specific network card, which is now gone.

--=20
Best regards,
 Scott                            mailto:Wizard@xxxxxxxx
=20

Cheers!=20
Sandi
http://pcductape.topcities.com/
SciFi Artwork
news://news.annexcafe.com/annexcafe.phoenix.assemblers
PCD-Offtopic group-(clean!)
pcd-offtopic-subscribe@xxxxxxxxxxxxxxx

  ----- Original Message -----=20
  From: Pam=20
  To: pcductape@xxxxxxxxxxxxx=20
  Sent: Sunday, December 29, 2002 10:33 PM
  Subject: [pcductape] Re: HTML Test 2 now networking with Win2k


  MessageOk, here goes.  I have a Win2k box acting as server, with a =
win98
  client and a winXP client.  Not too long ago I took the Win98 box =
offline
  because of some trouble it is having, totally unrelated to this =
problem.  I
  had an older nic in the Win2k box that only allowed 10 Mbps speed.  It =
ran
  perfectly, ICS worked just fine, only problem was speed.  I installed =
a new
  nic, no problem... so I thought. If I leave the XP box set to obtain =
IP
  automatically, which is how it was set with the old nic on the server, =
then
  it can't find the server.  But if I set the IP manually then they both =
can
  see each other, I can share all files, access the printer, etc., but =
when
  set to manual the ICS doesn't work.  I'm sure it is something I =
overlooked
  because I am NOT a network person, but I went as far as my knowledge =
can go
  to find out what I didn't set correctly.
  Any suggestions/guidance definitely appreciated.

  Pam



    Pam,

   


-- Binary/unsupported file stripped by Ecartis --
-- Type: image/gif
-- File: image001.gif


To unsubscribe from this list send an email to
pcductape-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
OR by logging into the Web interface. 

Other related posts: