[overture] Re: building a model rocket

  • From: Bill Henshaw <wdhenshaw@xxxxxxxxx>
  • To: overture@xxxxxxxxxxxxx
  • Date: Mon, 10 Oct 2016 16:16:25 -0400

Dan:
    I suggest that you start with something simple and then add parts. Also
I always recommend rounding off exterior corners.

...Bill

On Mon, Oct 10, 2016 at 11:18 AM, Dan Kokron <dkokron@xxxxxxxxx> wrote:

All,

I have a working overture-26 on a fedora-24 system, at least the internal
test run and verify.  For my first Overture project, I decided to build a
model rocket like you might find at your local hobby shop.  Basically a 46
cm long tube with three fins and a 10 cm elliptical nose cone.  I used the
sub.cmd file as a guide.  It turns out splines are no good for this project
as I need sharp corners at the aft end.  I have tried a dataPointMapping
for the nose profile using a point set generated with octave.  The trouble
is that Overture is moving the aft-most y value closer to the x-axis giving
me something less than a 90 degree turn.  See attached cmd file.  Is anyone
else seeing this kind of behaviour?

Dan

Other related posts: