Thanks Dominic! Regards, Sunil On Sat, Feb 28, 2009 at 6:20 AM, #DOMINIC DENVER JOHN CHANDAR# < DOMI0002@xxxxxxxxxx> wrote: > > Hi Sunil, > > Here is the attached file that you wanted... > > Regards, > Dominic > > Hello Bill, Dominic, > Can any of you please forward me the aerofoil.C that Bill sent as > attachment to post with the above subject line? I could not find it > there. I just want to use it as a starting point to write my code to > create overlap by means of hyperbolic meshing for our Structured Multi > Block mesh. If any body thinks that there is a more appropriate (or > relevant ) piece of code .. It would be nice if you can forward it to > me. > thanks and Regards, > Sunil. > > > -----Original Message----- > From: overture-bounce@xxxxxxxxxxxxx > [mailto:overture-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Henshaw > Sent: Wednesday, January 30, 2008 12:22 PM > To: freelists > Subject: [overture] Re: Hyberbolic grid generation without Ogen > > Hi Dominic, > > The attached file contains the main program airfoil.C that shows how > to generate the naca airfoil grid with the hyperbolic grid generator. I > have also attached some new versions of Overture files that you should > use, replacing the ones you have. > > regards, > Bill. > > #DOMINIC DENVER JOHN CHANDAR# wrote: > > Hi, > > > > I'm trying to write up a small code to generate a a grid around an > > airfoil without ogen using the HyperbolicMapping class. I followed the > > > naca.hype.cmd ogen command file and i still think that i have missed > > some information in the code since i always end up in getting a > > negative volume error (Some problem in the T.E). But the naca.hype.cmd > > > works very well using ogen...(I've used similar parameters for both > > the cmd file and the source code). The code is as follows. Any ways to > > > rectify this error ?... Many thanks....Dominic > > > -- the more you know, the more you realize of how little you know in the grander scheme of things