[ossrp-control] Re: screen reading information

Hi Doug,

Well a dedicated device is different ... Any braille printer or what not can
do that these days, but the problem is things like tracking and so on and so
forth ... It just reads:

You spoke of prerecorded messages ... Where are you going to put these
messages?

How are you going to capture those keystrokes?

And how will you deal with dynamic information such as harddrive size,
whether a menu option is selected or not, and so on and so forth?

Take care,
Sina

-----Original Message-----
From: ossrp-control-bounce@xxxxxxxxxxxxx
[mailto:ossrp-control-bounce@xxxxxxxxxxxxx] On Behalf Of Doug Parisian
Sent: Tuesday, April 26, 2005 6:38 PM
To: ossrp-control@xxxxxxxxxxxxx
Subject: [ossrp-control] Re: screen reading information


----- Original Message -----
From: "Sina Bahram" <sbahram@xxxxxxxxx>
To: <ossrp-control@xxxxxxxxxxxxx>
Sent: Tuesday, April 26, 2005 4:18 PM
Subject: [ossrp-control] Re: screen reading information Hey, I'm the new kid
on the block.

Sina, seems I recall a device called the "Speaqualizer" Which would read
everything from the bios on up to DOS (yes, before windows, in the days of
the steam engine.)  Since the bios consists of a finite number of words and
selections, would it not be possible to use a chip with pre-recorded text
and have the arrow, tab, etc, invoke the appropriate messages?

> that is actually technically impossible, I'm afraid.
>
> You see: there's litterally nothing to load from. No ram, no 
> harddrive, no CD, no thumb drive, no USB device, no firewire, ... 
> Absolutely nothing exists at bios time.
>
> Take care,
> Sina
>
> ________________________________
>
> From: ossrp-control-bounce@xxxxxxxxxxxxx
> [mailto:ossrp-control-bounce@xxxxxxxxxxxxx] On Behalf Of Dan Tonge
> Sent: Tuesday, April 26, 2005 2:32 PM
> To: ossrp-control@xxxxxxxxxxxxx
> Subject: [ossrp-control] Re: screen reading information
>
>
> It would be wonderful if a screen reader could be loaded early enough 
> so that we could use the PC parameters.  I know that is not the 
> correct name, but I can't think of it right now, but it is the mode 
> you can go into to make bios and other adjustments right at bootup time.
>
> Dan T
>
> ----- Original Message -----
> From: Tink Watson <mailto:tink@xxxxxxxxxx>
> To: ossrp-control@xxxxxxxxxxxxx
> Sent: Tuesday, April 26, 2005 5:35 AM
> Subject: [ossrp-control] Re: screen reading information
>
> Naama,
>
>     This isn't really my field, but I suspect it would be difficult to 
> achieve this. Safe mode works by prohibiting drivers from loading, 
> whether sound drivers, technology or application specific drivers. 
> Without these I imagine it would be tricky, even impossible to get a 
> screen reader loaded and running.
>
>     It certainly would be nice though, the inability to access the 
> bios, safe mode and other precursor environments is one of the biggest 
> irritations of using a screen reader.
>
> Tink.
> ----- Original Message -----
> From: "Naama Erez" <diva2@xxxxxxxxxxxxxxxx>
> To: <ossrp-control@xxxxxxxxxxxxx>
> Sent: Tuesday, April 26, 2005 11:20 AM
> Subject: [ossrp-control] Re: screen reading information
>
>
> > Just wondering, and that can be because my knowledge about this is
>
> > limited, is there any type of screen reader, or any possibility
> for a
> > screen reader to operate in safe mode?
> > ----- Original Message -----
> > From: "Will Pearson" <will-pearson@xxxxxxxxxxxxx>
> > To: <ossrp-control@xxxxxxxxxxxxx>
> > Sent: Monday, April 25, 2005 8:18 PM
> > Subject: [ossrp-control] Re: screen reading information
> >
> >
> >> Hi Juan,
> >>
> >> As far as I know, Beth Mynat's and Keith Edward's paper is the
> only one
> >> on
> >> how screen readers work.  There's been various ones written on
> screen
> >> reader
> >> design, such as a comparison paper written by Beth Mynat et al in
> 1994,
> >> which you can download from the publications section of the
> Everyday
> >> Computing Lab's website, which is part of the main GA Tech site.
> There's
> >> also been work done by Alistair Edwards at the University of
> York, in the
> >> UK, Steve Brewster from the University of Glasgow, in the UK,
> various
> >> people
> >> at the University of Toronto, in Canada, but these have mainly
> focused on
> >> design rather than implementation.  I did hear that Prof. Gary
> Bishop at
> >> the
> >> University of North Carolina was developing a new type of screen
> reader,
> >> based more around communication with the user, and any
> information on
> >> this
> >> will likely be on the UNC web site at:
> >> http://cs.unc.edu/research/assist
> >>
> >> Will
> >> ----- Original Message -----
> >> From: "Juan Hernandez" <juanh@xxxxxxx>
> >> To: <ossrp-control@xxxxxxxxxxxxx>
> >> Sent: Monday, April 25, 2005 10:17 AM
> >> Subject: [ossrp-control] screen reading information
> >>
> >>
> >>> Hello everyone,
> >>> First I am glad to say that a project of this kind has finally
> started.
> >> I've discussed this type of project with other people, and have
> written
> >> papers and such  for my course work at the univercity, on the
> research
> >> and
> >> development of a free or extremely low cost screen reading
> solution.
> >>>
> >>> I have quite a bit of coding background, but none in the screen
> reading
> >> area.
> >>>
> >>> I have downloaded the paper written by: Mynatt, E.D., and
> Edwards, W.K.
> >> (1992). " Mapping guis to auditory Interfaces, but I would like
> to know
> >> if
> >> anyone has any other information on screen reading development,
> consepts,
> >> theory, etc?
> >>>
> >>> Again, I am glad OSAT has started, and I hope to help as much as
> I can
> >>> in
> >> the future.  Thanks
> >>>
> >>> Juan Hernandez
> >>> San Diego, California
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >> To post to the list, send a message to:
> >> ossrp-control@xxxxxxxxxxxxx
> >> To unsubscribe, send a message to:
> >> ossrp-control-request@xxxxxxxxxxxxx
> >> and set the subject field of the message to "unsubscribe"
> (without the
> >> quotes
> >>
> >>
> >
> > To post to the list, send a message to:
> > ossrp-control@xxxxxxxxxxxxx
> > To unsubscribe, send a message to:
> > ossrp-control-request@xxxxxxxxxxxxx
> > and set the subject field of the message to "unsubscribe" (without
> the
> > quotes
> >
> >
>
> To post to the list, send a message to:
> ossrp-control@xxxxxxxxxxxxx
> To unsubscribe, send a message to:
> ossrp-control-request@xxxxxxxxxxxxx
> and set the subject field of the message to "unsubscribe" (without the 
> quotes
>
>
>
>
>
> To post to the list, send a message to:
> ossrp-control@xxxxxxxxxxxxx
> To unsubscribe, send a message to:
> ossrp-control-request@xxxxxxxxxxxxx
> and set the subject field of the message to "unsubscribe" (without the 
> quotes
> 

To post to the list, send a message to:
ossrp-control@xxxxxxxxxxxxx
To unsubscribe, send a message to:
ossrp-control-request@xxxxxxxxxxxxx
and set the subject field of the message to "unsubscribe" (without the
quotes



To post to the list, send a message to:
ossrp-control@xxxxxxxxxxxxx
To unsubscribe, send a message to:
ossrp-control-request@xxxxxxxxxxxxx
and set the subject field of the message to "unsubscribe" (without the quotes

Other related posts: