[ossrp-control] Re: screen reading information

It would be wonderful if a screen reader could be loaded early enough so that 
we could use the PC parameters.  I know that is not the correct name, but I 
can't think of it right now, but it is the mode you can go into to make bios 
and other adjustments right at bootup time.

Dan T
  ----- Original Message ----- 
  From: Tink Watson 
  To: ossrp-control@xxxxxxxxxxxxx 
  Sent: Tuesday, April 26, 2005 5:35 AM
  Subject: [ossrp-control] Re: screen reading information


  Naama,

      This isn't really my field, but I suspect it would be difficult to 
  achieve this. Safe mode works by prohibiting drivers from loading, whether 
  sound drivers, technology or application specific drivers. Without these I 
  imagine it would be tricky, even impossible to get a screen reader loaded 
  and running.

      It certainly would be nice though, the inability to access the bios, 
  safe mode and other precursor environments is one of the biggest irritations 
  of using a screen reader.

  Tink.
  ----- Original Message ----- 
  From: "Naama Erez" <diva2@xxxxxxxxxxxxxxxx>
  To: <ossrp-control@xxxxxxxxxxxxx>
  Sent: Tuesday, April 26, 2005 11:20 AM
  Subject: [ossrp-control] Re: screen reading information


  > Just wondering, and that can be because my knowledge about this is 
  > limited, is there any type of screen reader, or any possibility for a 
  > screen reader to operate in safe mode?
  > ----- Original Message ----- 
  > From: "Will Pearson" <will-pearson@xxxxxxxxxxxxx>
  > To: <ossrp-control@xxxxxxxxxxxxx>
  > Sent: Monday, April 25, 2005 8:18 PM
  > Subject: [ossrp-control] Re: screen reading information
  >
  >
  >> Hi Juan,
  >>
  >> As far as I know, Beth Mynat's and Keith Edward's paper is the only one 
  >> on
  >> how screen readers work.  There's been various ones written on screen 
  >> reader
  >> design, such as a comparison paper written by Beth Mynat et al in 1994,
  >> which you can download from the publications section of the Everyday
  >> Computing Lab's website, which is part of the main GA Tech site.  There's
  >> also been work done by Alistair Edwards at the University of York, in the
  >> UK, Steve Brewster from the University of Glasgow, in the UK, various 
  >> people
  >> at the University of Toronto, in Canada, but these have mainly focused on
  >> design rather than implementation.  I did hear that Prof. Gary Bishop at 
  >> the
  >> University of North Carolina was developing a new type of screen reader,
  >> based more around communication with the user, and any information on 
  >> this
  >> will likely be on the UNC web site at:
  >> http://cs.unc.edu/research/assist
  >>
  >> Will
  >> ----- Original Message ----- 
  >> From: "Juan Hernandez" <juanh@xxxxxxx>
  >> To: <ossrp-control@xxxxxxxxxxxxx>
  >> Sent: Monday, April 25, 2005 10:17 AM
  >> Subject: [ossrp-control] screen reading information
  >>
  >>
  >>> Hello everyone,
  >>> First I am glad to say that a project of this kind has finally started.
  >> I've discussed this type of project with other people, and have written
  >> papers and such  for my course work at the univercity, on the research 
  >> and
  >> development of a free or extremely low cost screen reading solution.
  >>>
  >>> I have quite a bit of coding background, but none in the screen reading
  >> area.
  >>>
  >>> I have downloaded the paper written by: Mynatt, E.D., and Edwards, W.K.
  >> (1992). " Mapping guis to auditory Interfaces, but I would like to know 
  >> if
  >> anyone has any other information on screen reading development, consepts,
  >> theory, etc?
  >>>
  >>> Again, I am glad OSAT has started, and I hope to help as much as I can 
  >>> in
  >> the future.  Thanks
  >>>
  >>> Juan Hernandez
  >>> San Diego, California
  >>>
  >>>
  >>>
  >>>
  >>>
  >>>
  >>>
  >>
  >>
  >> To post to the list, send a message to:
  >> ossrp-control@xxxxxxxxxxxxx
  >> To unsubscribe, send a message to:
  >> ossrp-control-request@xxxxxxxxxxxxx
  >> and set the subject field of the message to "unsubscribe" (without the 
  >> quotes
  >>
  >>
  >
  > To post to the list, send a message to:
  > ossrp-control@xxxxxxxxxxxxx
  > To unsubscribe, send a message to:
  > ossrp-control-request@xxxxxxxxxxxxx
  > and set the subject field of the message to "unsubscribe" (without the 
  > quotes
  >
  > 

  To post to the list, send a message to:
  ossrp-control@xxxxxxxxxxxxx
  To unsubscribe, send a message to:
  ossrp-control-request@xxxxxxxxxxxxx
  and set the subject field of the message to "unsubscribe" (without the quotes

Other related posts: