[orcad] Library Part Creation
- From: "Jason Stubbs" <jstubbs@xxxxxxxxxxxxx>
- To: "Orcad Freelist" <orcad@xxxxxxxxxxxxx>
- Date: Wed, 23 Jun 2004 10:53:01 -0400
Hello Everyone!
When I created a Hetero part, without thinking too much about how I was
going to format it, I decided to create 4 parts in the package. However, as
the creation progressed, I found out that I only needed two of the parts in
the package. I tried to change the value from 4 to 2, but an error popped up
saying that I can only delete parts when in package view. Thing is, I WAS
in package view.
From some experimenting, I discovered that I can increase the number of
parts in a hetero package, but not decrease it. I can however increase and
decrease the number of parts in a homo package without a problem. The only
solution I have found is to create a new hetero package with 2 parts in it
and then copy the parts from the original package into the new one.
Is there another way to do this?
Thanks
Jason Stubbs
Efficient Channel Coding
600 Safeguard Plaza
Brooklyn Heights
OH, 44131
Tel: 216 635 1610
Fax: 216 635 1630
www.eccincorp.com
Other related posts:
