Re: Oracle RAC multiple Nic for Private network vs interconnect bonding

  • From: "Sanjay Mishra" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "smishra_97" for DMARC)
  • To: "martin.klier@xxxxxxxxxxxxxxxxx" <martin.klier@xxxxxxxxxxxxxxxxx>, "dmarc-noreply@xxxxxxxxxxxxx" <dmarc-noreply@xxxxxxxxxxxxx>
  • Date: Tue, 22 Aug 2017 20:39:55 +0000 (UTC)

Thanks Martin for your update.
Sanjay 

    On Tuesday, August 22, 2017 9:49 AM, Martin Klier - Performing Databases 
GmbH <martin.klier@xxxxxxxxxxxxxxxxx> wrote:
 

 Hi Sanjay,
I have good experience with HAIP, too. Usually it causes less discussions w/ 
sysadmins and network staff, and is less prone to missing switchovers due to 
misconfigured bonding methods (or mis-coordinated ones, speaking of switch and 
bond configs). 
Important, as Stefan already pointed out, use seperate networks for each 
"channel". But as I know from my current RAC project, just a little subnetting 
on your interfaces will do, don't mess with the sleeping network lions...

-- 
Martin Klier | Performing Databases GmbH
Managing Partner | Senior DB Consultant
Oracle ACE

martin.klier@xxxxxxxxxxxxxxxxx | https://www.performing-databases.com


Von: "Sanjay Mishra" <dmarc-noreply@xxxxxxxxxxxxx>
An: "Oracle-L Freelists" <oracle-l@xxxxxxxxxxxxx>
Gesendet: Montag, 21. August 2017 19:04:28
Betreff: Oracle RAC multiple Nic for Private network vs interconnect bonding


Hi
Can someone share his experience in using multiple NIC for Private network and 
therby focing Oracle to use multiple HAIP vs interconnect bonding. I had RAC 
setup where OS level Private network Bonding is not failing over due to one 
issue on NIC and causing Oracle cluster to bounce the node. This happen several 
time and so checking Oracle Docs that says that 11g(11.2) onwards it is 
recommended to use multiple nic and details from DOc is
"With Redundant Interconnect Usage, you can identify multiple interfaces to use 
for the cluster private network, without the need of using bonding or other 
technologies. This functionality is available starting with Oracle Database 11g 
Release 2 (11.2.0.2). If you use the Oracle Clusterware Redundant Interconnect 
feature, then you must use IPv4 addresses for the interfaces.When you define 
multiple interfaces, Oracle Clusterware creates from one to four highly 
available IP (HAIP) addresses. Oracle RAC and Oracle Automatic Storage 
Management (Oracle ASM) instances use these interface addresses to ensure 
highly available, load-balanced interface communication between nodes. The 
installer enables Redundant Interconnect Usage to provide a high availability 
private network.By default, Oracle Grid Infrastructure software uses all of the 
HAIP addresses for private network communication, providing load-balancing 
across the set of interfaces you identify for the private network. If a private 
interconnect interface fails or become non-communicative, then Oracle 
Clusterware transparently moves the corresponding HAIP address to one of the 
remaining functional interfaces." 
So want to check is someone is using and share the experience
TIASanjay



   

Other related posts: