Re: LAN N/w thruput, Basic Qs - Off-Topic
- From: Sriram Kumar <k.sriramkumar@xxxxxxxxx>
- To: VIVEK_SHARMA@xxxxxxxxxxx
- Date: Fri, 23 Dec 2005 09:42:36 -0400
Hi,
Let me admit that I am not an networking expert. In my understanding, Full
Duplex 100mbps means that you can have send and receive packets
simultaneously and therotically the bandwidth is 200mbps. 100mbps for send
and 100mbps for receive. experts correct fi my understanding is wrong.
Best Regards
Sriram Kumar
On 12/22/05, VIVEK_SHARMA <VIVEK_SHARMA@xxxxxxxxxxx> wrote:
>
> For a LAN configured at 100 MBPS Full Duplex, which of the following is
> True?
>
>
>
> 1) 100 MBPS available for Send + 100 MBPS available for
> receive
>
> 2) 50 MBPS available for Send + 50 MBPS available for
> receive
>
>
>
> Any reasons if possible with it please?
>
>
>
> Thanks
>
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended
> solely for the use of the addressee(s). If you are not the intended
> recipient, please notify the sender by e-mail and delete the original
> message. Further, you are not to copy, disclose, or distribute this e-mail
> or its contents to any other person and any such actions are unlawful. This
> e-mail may contain viruses. Infosys has taken every reasonable precaution to
> minimize this risk, but is not liable for any damage you may sustain as a
> result of any virus in this e-mail. You should carry out your own virus
> checks before opening the e-mail or attachment. Infosys reserves the right
> to monitor and review the content of all messages sent to or from this
> e-mail address. Messages sent to or from this e-mail address may be stored
> on the Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
Other related posts:
