Re: Exadata V2 Compute Node 10GigE PCI card installation
- From: Andy Colvin <acolvin@xxxxxxxxxxx>
- To: Oracle - L <Oracle-L@xxxxxxxxxxxxx>
- Date: Thu, 10 Nov 2011 08:37:17 -0600
Imagine that. I would have expected them to tell you to buy a new Exadata. In
all seriousness, once you have an Exadata, you are not allowed to modify the
physical hardware. This ranges from replacing unused 10GbE cards with
fibrechannel HBAs, installing additional hard drives in the unused SAS slots on
the front of compute nodes, adding memory to the V2 systems (you can purchase a
memory upgrade kit for the X2-2 systems), or even installing non-Exadata
servers in the physical Exadata rack. I'll have to crack open our V2 and X2-2
compute nodes and compare the airflow paths today.
Andy Colvin
Principal Consultant
Enkitec
andy.colvin@xxxxxxxxxxx
http://blog.oracle-ninja.com
Office - 972-607-3744
Mobile - 214-763-8140
On Nov 9, 2011, at 9:55 AM, Vishal Gupta wrote:
> I raised an support call with Oracle Exadata support team to get their view
> on this. They said, 10GigE cards generate too much heat and V2 compute nodes
> are not capable of handling that heat due to air flow problems. It results in
> surrounding compoents and servers becoming too hot. In X2-2 and X2-8 compute
> nodes, airflow has been improved and they have been able to put 10GigE cards.
>
> Without me even mentioning Voltaire 4036E bridge, support straight said i
> could use that as a option.
>
> I think i will have to use option #3. As option #4 looks too expensive at the
> moment.
>
> Regards,
> Vishal Gupta
> Email: vishal@xxxxxxxxxxxxxxx
> Blog: http://blog.vishalgupta.com
>
>
> On 9 Nov 2011, at 15:09, Greg Rahn wrote:
>
>> Options #1 and #2 are not allowed, so that leaves you with #3 and #4.
>>
>> On Wed, Nov 9, 2011 at 2:47 AM, Vishal Gupta <vishal@xxxxxxxxxxxxxxx> wrote:
>>> Hi,
>>>
>>> One of my client currently has Exadata V2 racks, which do not have 10GigE
>>> card in them. We were thinking of provisioning Tier-2 storage via dNFS to a
>>> NAS filer (read NetApp). Currently since V2 compute nodes have only 40Gb/s
>>> infiniband and 1GigE cards in them, we can only connect over 1Gb/s speed to
>>> NAS filer. Oracle is quoting ridiculous price (even thought of mention the
>>> range makes me little unhappy) for their ZFS Storage appliance which have
>>> infiniband connectivity.
>>>
>>> Following are the few options to get the decent enough performance for
>>> Tier-2 Storage on exadata racks.
>>> 1. Oracle installs a 10GigE PCI card in V2 compute nodes.
>>> 2. Customer install a 10GigE PCI card in V2 compute nodes. They do have a
>>> empty PCI slot, so this is technically possible.
>>> 3. Customer uses Voltaire Grid Director 4036E bridge, a low latency QDR
>>> Infiniband to 10Gig bridge.
>>> 4. Customer buys the Oracle/Sun ZFS Storage appliance to connect to NAS
>>> over infiniband directly.
>>>
>>> My order of preference of choices above are 1,2,3,4 as listed above.
>>>
>>> My question to the list and Exadata community out there is, does Oracle
>>> allow you to install 10GigE PCI card in V2 compute nodes?
>>
>> --
>> Regards,
>> Greg Rahn
>> http://structureddata.org
>
> --
> //www.freelists.org/webpage/oracle-l
>
>
--
//www.freelists.org/webpage/oracle-l
Other related posts:
