Re: ADCFGCLONE.PL at DB always fail

Hello Mostafa,

I agree with James.
When you run admkappsutil.pl, the script shows the location of the
appsutil.zip file it is creating. It usually is $APPL_TOP/admin/out
directory. You will have to copy this across to the db-node's $ORACLE_HOME
dir. Then copy the XML file from the appsutil_old directory into this new
appsutil directory and run autoconfig. Then run adpreclone.
Then follow rest of the steps.

-Vikram
On Thu, Jan 15, 2009 at 3:06 PM, Mostafa Eletriby <m_etrib@xxxxxxxxx> wrote:

>   Hi james,
>
> Thanks alot for your quick response.
>
> These notes are very usefull.As you see that these patches are not
> responsible for the problem I have in instconf,drv problem as you see in the
> log file.  So what do u think for the main reasons for that?
>
> Is it cleaning the source server from previous clone?? can solve this issue
> I have.
> Also I never did this cleaning before ,If so plz tell me step by step how
> to clean it , coz I have little conflicts at the note: *364565.1 which
> explain it.*
> **
> I am following this steps as u see. & plz answer these questions.
>
> On the DB Tier:-
>
>    - Rename RDBMS $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old   *(OK
>    no problem)*
>    - On the Apps Tier, run "perl $AD_TOP/bin/admkappsutil.pl" *(Ok)*
>    - Copy the appsutil.zip to the RDBMS $ORACLE_HOME and unzip
>
> * (where is this file & where to copy it ??)*
>
>    - Copy the Context file from RDBMS $ORACLE_HOME/appsutil_old to the new
>    $ORACLE_HOME/appsutil  *(OK)*
>
>
>
>    - Run AutoConfig on the DB Tier  (*OK)*
>    - Do the "Prepare Source system" steps i.e "perl adpreclone.pl dbTier"
>    *(OK)*
>
> On the Apps Tier:-
>
>    - Rename $COMMON_TOP/clone to $COMMON_TOP/clone_old *(OK)*
>    - Rename 8.0.6 $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old  *
>    (ok)*
>    - Rename iAS $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old *(ok)*
>    - Do the "Prepare Source system" steps i.e "perl adpreclone.pl
>    appsTier" *(ok)*
>
>
> Do you think that this cleaning will solve the problem I have instead of
> Applying AD.I.2 and TX.K , coz I think that these patches for keeping me up
> to date level but not specific to my problem.I will apply all your mentioned
> patches later.
>
> Ok waiting ur reply.
>
> Thanks alot.
> Regards,
> Mostafa
>
> --- On *Thu, 1/15/09, James Morrow <morrow.james@xxxxxxxxx>* wrote:
>
> From: James Morrow <morrow.james@xxxxxxxxx>
> Subject: Re: ADCFGCLONE.PL at DB always fail-- LOG FILE Attached
> To: ora-apps-dba@xxxxxxxxxxxxx
> Date: Thursday, January 15, 2009, 2:16 PM
>
> You'll find these notes useful:
>
> 230672.1      Cloning Oracle Applications Release 11i with Rapid Clone
> 216664.1      FAQ: Cloning Oracle Applications Release 11i
>
> These will also be helpful:
>
> 165195.1      Using AutoConfig to Manage System Configurations with Oracle
> Applications 11i
>
>
> In order to re-build the appsutil directory, look at note 165195.1 and
> follow the instructions under "Copy AutoConfig to the RDBMS
> ORACLE_HOME".  That step generally needs to be performed after you
> apply AD, ATG, or TXK patchsets to your APPL_TOP.
>
> Since you're on 11.5.10.2, you should already be AutoConfig-enabled
> and, barring configuration issues, able to perform a successful clone
> without needing to apply any additional patches.
>
> Even though they shouldn't be required to solve this particular
> problem, I generally recommend that customers start applying the
> following as quickly as may be convienent:
>
>       ATG_PF.H.RUP6
>       AD.I.6
>       TXK.S
>       CPUJan2009      (And all earlier E-Business CPU's [EBS ones aren't
> cumulative])
>       RDBMS 10.2.0.4  (I believe 9i has been de-supported).
>       Sun JRE         (Instead of JInitiator)
>       Sun Java 1.6    (Server-side)
>
> -- James
> ----------------------------------------------------------------------
> James J. Morrow | Senior Oracle Applications DBA
> morrow.james <at> gmail <dot> com
>
>
>
>
> On Thu, Jan 15, 2009 at 12:29 PM, Mostafa Eletriby <m_etrib@xxxxxxxxx>
> wrote:
> >  Hi James,
> >
> > please tell me the detailed steps for using admkappsutil at source node
> & an
> > oracle note too for this use.
> >
> > Also I would like to know if I should apply the patch of  TX.K  latest
> > Autoconfig Rollup S
> > P# 165195.1
> > and
> > the patch for updating AD Administration  to AD.I.6  P#6502082 at source
> > instance in order to complete the post clone successfully at Target too?
> >
> > This is an important question for me :)
> >
> > I am currently running at AD.I.4  and TKX.M apps 11.5.10.2  Database
> 9.2.0.8
> >
> > & remember the preclone always complete sucessfully.
> >
> > Thanks
> > Regards,
> >
> >
> > --- On Thu, 1/15/09, James Morrow <morrow.james@xxxxxxxxx> wrote:
> >
> > From: James Morrow <morrow.james@xxxxxxxxx>
> > Subject: Re: ADCFGCLONE.PL at DB always fail-- LOG FILE Attached
> > To: ora-apps-dba@xxxxxxxxxxxxx
> > Date: Thursday, January 15, 2009, 12:32 PM
> >
> > Consider:
> >
> > 1)  Rebuild the appsutil directory (using admkappsutil, per the
> > instructions in the cloning document)
> > 2)  Re-do your preclone steps in the source
> > 3)  Copy over the appsutil from the source
> > 4)  Try the post-clone again.
> >
> > -- James
> > ----------------------------------------------------------------------
> > James J. Morrow | Senior Oracle Applications DBA
> > morrow.james <at> gmail <dot> com
> >
> >
> >
> >
> > On Thu, Jan 15, 2009 at 11:29 AM, Mostafa Eletriby
> <m_etrib@xxxxxxxxx>
> > wrote:
> >>
> >> Hi Vikram,
> >>
> >> I copied all oracle Home sucessfully , There is no problem in copying.
> >> Also this problem is always repeated from this source instance.
> >> The preclone of Database always complete sucessfully.
> >>
> >> The log file of Preclone of Database is attached.
> >> The workaround I make to pass this problem is to remove the referred
> error
> >> lines from the driver.
> >>
> >>
> >> Please advice me.
> >> Thanks
> >> Regards,
> >>
> >>
> >> --- On Thu, 1/15/09, Vikram <vikramsingh120@xxxxxxxxx> wrote:
> >>
> >> From: Vikram <vikramsingh120@xxxxxxxxx>
> >> Subject: Re: ADCFGCLONE.PL at DB always fail
> >> To: ora-apps-dba@xxxxxxxxxxxxx
> >> Date: Thursday, January 15, 2009, 11:31 AM
> >>
> >> Hello Mostafa,
> >>
> >> I will go with the assumption that you are copying your Oracle_Home
> too
> > from
> >> source to target. Since you say adpreclone ran successfully, this is
> > really
> >> strange that it is reporting the files from the same Oracle_Home
> missing
> >> where it has compiled the instconf.drv file from. Can you upload the
> >> adpreclone.pl log file from source too? Let's begin at the
> beginning!
> >> Looks like this is a regular issue with your instance. Is this error
> >> occurring with any other clone of instance from the same source? Or is
> > this
> >> error only with the clone of this instance? What workaround have you
> been
> >> using so far to overcome this?
> >>
> >> -Vikram
> >>
> >> On Thu, Jan 15, 2009 at 10:29 AM, Mostafa Eletriby
> > <m_etrib@xxxxxxxxx>
> >> wrote:
> >>>
> >>> Hi DBA,
> >>>
> >>> If Anyone can solve with me this issue about ADCFGCLONE.PL  that
> > always
> >>> fail.
> >>>
> >>> Regards,
> >>> Mostafa
> >>>
> >>> --- On Wed, 1/14/09, Mostafa Eletriby <m_etrib@xxxxxxxxx>
> wrote:
> >>>
> >>> From: Mostafa Eletriby <m_etrib@xxxxxxxxx>
> >>> Subject: RE: ADCFGCLONE.PL at DB always fail
> >>> To: ora-apps-dba@xxxxxxxxxxxxx
>
> >>> Date: Wednesday, January 14, 2009, 6:38 AM
> >>>
> >>> Hi DBAs,
> >>>
> >>> Hi Mamta, Thanks for this useful note that clarify the cause of
> > problem.
> >>>
> >>> Actually The preclone ran successfully.
> >>>
> >>> I would like to solve this problem of Post Clone permanetly
> instead of
> >>> this workround to remove the lines of files reffrefed in the
> > inistconf.drv
> >>> of DB which has errors in the log file. As This problem always
> > repeated at
> >>> Post Clone of the same PROD instance.
> >>>
> >>> I would like to know if I should rename & move some files
> &
> > folders at the
> >>> source instance like (appsutil) to clean the source from Previous
> > clone Or I
> >>> leave all these files as they are?
> >>>
> >>> This issue is highly recomeneded by oracle as shown in the NoteID:
> >>> 364565.1
> >>> Section 2. Preparing Source System
> >>>
> >>> But I didnt ever do it before , I would like to know if it is
> > mandatory
> >>> for cloning ? or at least to solve my issue permately ?
> >>>
> >>> I have little conflicts  about this cleaning if it is the reason
> &
> > how to
> >>> do it.
> >>>
> >>> We are running apps 11.5.10.2  upgraded to Database 9.2.0.8
> >>>
> >>> Please advice me  :)
> >>>
> >>> Regards,
> >>> Mostafa
> >>>
> >>>
> >>>
> >>>
> >>> --- On Tue, 1/13/09, NEELI-SC, Mamta
> > <Mamta.NEELI@xxxxxxxxxxxxxx> wrote:
> >>>
> >>> From: NEELI-SC, Mamta <Mamta.NEELI@xxxxxxxxxxxxxx>
> >>> Subject: RE: ADCFGCLONE.PL at DB always fail
> >>> To: ora-apps-dba@xxxxxxxxxxxxx
> >>> Date: Tuesday, January 13, 2009, 4:34 AM
> >>>
> >>> Hi Mostafa,
> >>>
> >>>
> >>> Please try to follow the document 307954.1 might be helpful for
> you.
> >>>
> >>> Regards
> >>> Mamta
> >>>
> >>> ________________________________
> >>> From: ora-apps-dba-bounce@xxxxxxxxxxxxx
> >>> [mailto:ora-apps-dba-bounce@xxxxxxxxxxxxx] On Behalf Of Mostafa
> > Eletriby
> >>> Sent: Tuesday, 13 January 2009 16:05
> >>> To: ora-apps-dba@xxxxxxxxxxxxx
> >>> Subject: ADCFGCLONE.PL at DB always fail
> >>>
> >>> DBAs,
> >>>
> >>> I have a problem in running adcgfclone.pl of Database at Target
> > instance
> >>> at Post clone phase.
> >>>
> >>> I always face this problem This problem always repeated at the
> same
> >>> instance which shows errors in instconf.drv at Database.
> >>>
> >>> I attached the log file of the problem.
> >>>
> >>> Please advice me.
> >>>
> >>> Regards,
> >>> Mostafa
> >>>
> >>>
> >>
> >>
> >>
> >
> >
> >
>
>
>
>

Other related posts: