Re: ADCFGCLONE.PL at DB always fail

Yes, I think that the steps outlined might resolve your issue.

You shouldn't need to comment out lines from the instconf.drv driver
file in order to complete a clone.

-- James
----------------------------------------------------------------------
James J. Morrow | Senior Oracle Applications DBA | TriOra Group, LLC
morrow.james <at> gmail <dot> com
james.morrow <at> trioragroup <dot> com




On Thu, Jan 15, 2009 at 2:06 PM, Mostafa Eletriby <m_etrib@xxxxxxxxx> wrote:
> Hi james,
>
> Thanks alot for your quick response.
>
> These notes are very usefull.As you see that these patches are not
> responsible for the problem I have in instconf,drv problem as you see in the
> log file.  So what do u think for the main reasons for that?
>
> Is it cleaning the source server from previous clone?? can solve this issue
> I have.
> Also I never did this cleaning before ,If so plz tell me step by step how to
> clean it , coz I have little conflicts at the note: 364565.1 which explain
> it.
>
> I am following this steps as u see. & plz answer these questions.
> On the DB Tier:-
>
> Rename RDBMS $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old   (OK no
> problem)
> On the Apps Tier, run "perl $AD_TOP/bin/admkappsutil.pl" (Ok)
> Copy the appsutil.zip to the RDBMS $ORACLE_HOME and unzip
>
>  (where is this file & where to copy it ??)
>
> Copy the Context file from RDBMS $ORACLE_HOME/appsutil_old to the new
> $ORACLE_HOME/appsutil  (OK)
>
>
>
> Run AutoConfig on the DB Tier  (OK)
> Do the "Prepare Source system" steps i.e "perl adpreclone.pl dbTier" (OK)
>
> On the Apps Tier:-
>
> Rename $COMMON_TOP/clone to $COMMON_TOP/clone_old (OK)
> Rename 8.0.6 $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old  (ok)
> Rename iAS $ORACLE_HOME/appsutil to $ORACLE_HOME/appsutil_old (ok)
> Do the "Prepare Source system" steps i.e "perl adpreclone.pl appsTier" (ok)
>
>
> Do you think that this cleaning will solve the problem I have instead of
> Applying AD.I.2 and TX.K , coz I think that these patches for keeping me up
> to date level but not specific to my problem.I will apply all your mentioned
> patches later.
>
> Ok waiting ur reply.
>
> Thanks alot.
> Regards,
> Mostafa
>
> --- On Thu, 1/15/09, James Morrow <morrow.james@xxxxxxxxx> wrote:
>
> From: James Morrow <morrow.james@xxxxxxxxx>
> Subject: Re: ADCFGCLONE.PL at DB always fail-- LOG FILE Attached
> To: ora-apps-dba@xxxxxxxxxxxxx
> Date: Thursday, January 15, 2009, 2:16 PM
>
> You'll find these notes useful:
>
> 230672.1      Cloning Oracle Applications Release 11i with Rapid Clone
> 216664.1      FAQ: Cloning Oracle Applications Release 11i
>
> These will also be helpful:
>
> 165195.1      Using AutoConfig to Manage System Configurations with Oracle
> Applications 11i
>
>
> In order to re-build the appsutil directory, look at note 165195.1 and
> follow the instructions under "Copy AutoConfig to the RDBMS
> ORACLE_HOME".  That step generally needs to be performed after you
> apply AD, ATG, or TXK patchsets to your APPL_TOP.
>
> Since you're on 11.5.10.2, you should already be AutoConfig-enabled
> and, barring configuration issues, able to perform a successful clone
> without needing to apply any additional patches.
>
> Even though they shouldn't be required to solve this particular
> problem, I generally recommend that customers start applying the
> following as quickly as may be convienent:
>
>       ATG_PF.H.RUP6
>       AD.I.6
>       TXK.S
>       CPUJan2009      (And all earlier E-Business CPU's [EBS ones aren't
> cumulative])
>       RDBMS 10.2.0.4  (I believe 9i has been de-supported).
>       Sun JRE         (Instead of JInitiator)
>       Sun Java 1.6    (Server-side)
>
> -- James
> ----------------------------------------------------------------------
> James J. Morrow | Senior Oracle Applications DBA
> morrow.james <at> gmail <dot> com
>
>
>
>
> On Thu, Jan 15, 2009 at 12:29 PM, Mostafa Eletriby <m_etrib@xxxxxxxxx>
> wrote:
>>  Hi James,
>>
>> please tell me the detailed steps for using admkappsutil at source node
> & an
>> oracle note too for this use.
>>
>> Also I would like to know if I should apply the patch of  TX.K  latest
>> Autoconfig Rollup S
>> P# 165195.1
>> and
>> the patch for updating AD Administration  to AD.I.6  P#6502082 at source
>> instance in order to complete the post clone successfully at Target too?
>>
>> This is an important question for me :)
>>
>> I am currently running at AD.I.4  and TKX.M apps 11.5.10.2  Database
> 9.2.0.8
>>
>> & remember the preclone always complete sucessfully.
>>
>> Thanks
>> Regards,
>>
>>
>> --- On Thu, 1/15/09, James Morrow <morrow.james@xxxxxxxxx> wrote:
>>
>> From: James Morrow <morrow.james@xxxxxxxxx>
>> Subject: Re: ADCFGCLONE.PL at DB always fail-- LOG FILE Attached
>> To: ora-apps-dba@xxxxxxxxxxxxx
>> Date: Thursday, January 15, 2009, 12:32 PM
>>
>> Consider:
>>
>> 1)  Rebuild the appsutil directory (using admkappsutil, per the
>> instructions in the cloning document)
>> 2)  Re-do your preclone steps in the source
>> 3)  Copy over the appsutil from the source
>> 4)  Try the post-clone again.
>>
>> -- James
>> ----------------------------------------------------------------------
>> James J. Morrow | Senior Oracle Applications DBA
>> morrow.james <at> gmail <dot> com
>>
>>
>>
>>
>> On Thu, Jan 15, 2009 at 11:29 AM, Mostafa Eletriby
> <m_etrib@xxxxxxxxx>
>> wrote:
>>>
>>> Hi Vikram,
>>>
>>> I copied all oracle Home sucessfully , There is no problem in copying.
>>> Also this problem is always repeated from this source instance.
>>> The preclone of Database always complete sucessfully.
>>>
>>> The log file of Preclone of Database is attached.
>>> The workaround I make to pass this problem is to remove the referred
> error
>>> lines from the driver.
>>>
>>>
>>> Please advice me.
>>> Thanks
>>> Regards,
>>>
>>>
>>> --- On Thu, 1/15/09, Vikram <vikramsingh120@xxxxxxxxx> wrote:
>>>
>>> From: Vikram <vikramsingh120@xxxxxxxxx>
>>> Subject: Re: ADCFGCLONE.PL at DB always fail
>>> To: ora-apps-dba@xxxxxxxxxxxxx
>>> Date: Thursday, January 15, 2009, 11:31 AM
>>>
>>> Hello Mostafa,
>>>
>>> I will go with the assumption that you are copying your Oracle_Home
> too
>> from
>>> source to target. Since you say adpreclone ran successfully, this is
>> really
>>> strange that it is reporting the files from the same Oracle_Home
> missing
>>> where it has compiled the instconf.drv file from. Can you upload the
>>> adpreclone.pl log file from source too? Let's begin at the
> beginning!
>>> Looks like this is a regular issue with your instance. Is this error
>>> occurring with any other clone of instance from the same source? Or is
>> this
>>> error only with the clone of this instance? What workaround have you
> been
>>> using so far to overcome this?
>>>
>>> -Vikram
>>>
>>> On Thu, Jan 15, 2009 at 10:29 AM, Mostafa Eletriby
>> <m_etrib@xxxxxxxxx>
>>> wrote:
>>>>
>>>> Hi DBA,
>>>>
>>>> If Anyone can solve with me this issue about ADCFGCLONE.PL  that
>> always
>>>> fail.
>>>>
>>>> Regards,
>>>> Mostafa
>>>>
>>>> --- On Wed, 1/14/09, Mostafa Eletriby <m_etrib@xxxxxxxxx>
> wrote:
>>>>
>>>> From: Mostafa Eletriby <m_etrib@xxxxxxxxx>
>>>> Subject: RE: ADCFGCLONE.PL at DB always fail
>>>> To: ora-apps-dba@xxxxxxxxxxxxx
>>>> Date: Wednesday, January 14, 2009, 6:38 AM
>>>>
>>>> Hi DBAs,
>>>>
>>>> Hi Mamta, Thanks for this useful note that clarify the cause of
>> problem.
>>>>
>>>> Actually The preclone ran successfully.
>>>>
>>>> I would like to solve this problem of Post Clone permanetly
> instead of
>>>> this workround to remove the lines of files reffrefed in the
>> inistconf.drv
>>>> of DB which has errors in the log file. As This problem always
>> repeated at
>>>> Post Clone of the same PROD instance.
>>>>
>>>> I would like to know if I should rename & move some files
> &
>> folders at the
>>>> source instance like (appsutil) to clean the source from Previous
>> clone Or I
>>>> leave all these files as they are?
>>>>
>>>> This issue is highly recomeneded by oracle as shown in the NoteID:
>>>> 364565.1
>>>> Section 2. Preparing Source System
>>>>
>>>> But I didnt ever do it before , I would like to know if it is
>> mandatory
>>>> for cloning ? or at least to solve my issue permately ?
>>>>
>>>> I have little conflicts  about this cleaning if it is the reason
> &
>> how to
>>>> do it.
>>>>
>>>> We are running apps 11.5.10.2  upgraded to Database 9.2.0.8
>>>>
>>>> Please advice me  :)
>>>>
>>>> Regards,
>>>> Mostafa
>>>>
>>>>
>>>>
>>>>
>>>> --- On Tue, 1/13/09, NEELI-SC, Mamta
>> <Mamta.NEELI@xxxxxxxxxxxxxx> wrote:
>>>>
>>>> From: NEELI-SC, Mamta <Mamta.NEELI@xxxxxxxxxxxxxx>
>>>> Subject: RE: ADCFGCLONE.PL at DB always fail
>>>> To: ora-apps-dba@xxxxxxxxxxxxx
>>>> Date: Tuesday, January 13, 2009, 4:34 AM
>>>>
>>>> Hi Mostafa,
>>>>
>>>>
>>>> Please try to follow the document 307954.1 might be helpful for
> you.
>>>>
>>>> Regards
>>>> Mamta
>>>>
>>>> ________________________________
>>>> From: ora-apps-dba-bounce@xxxxxxxxxxxxx
>>>> [mailto:ora-apps-dba-bounce@xxxxxxxxxxxxx] On Behalf Of Mostafa
>> Eletriby
>>>> Sent: Tuesday, 13 January 2009 16:05
>>>> To: ora-apps-dba@xxxxxxxxxxxxx
>>>> Subject: ADCFGCLONE.PL at DB always fail
>>>>
>>>> DBAs,
>>>>
>>>> I have a problem in running adcgfclone.pl of Database at Target
>> instance
>>>> at Post clone phase.
>>>>
>>>> I always face this problem This problem always repeated at the
> same
>>>> instance which shows errors in instconf.drv at Database.
>>>>
>>>> I attached the log file of the problem.
>>>>
>>>> Please advice me.
>>>>
>>>> Regards,
>>>> Mostafa
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>

Other related posts: