[opendtv] Re: White paper from CEA

  • From: "Allen Le Roy Limberg" <allimberg@xxxxxxxxxxxx>
  • To: <opendtv@xxxxxxxxxxxxx>
  • Date: Mon, 7 Nov 2005 09:23:38 -0500

No separate downleads.  A separate IF for each tuner at the masthead.  All
are reflexed on the same co-ax downlead.  Power for the tuners and control
signals are also reflexed on the same co-ax.

Al

----- Original Message ----- 
From: "Manfredi, Albert E" <albert.e.manfredi@xxxxxxxxxx>
To: <opendtv@xxxxxxxxxxxxx>
Sent: Sunday, November 06, 2005 5:15 PM
Subject: [opendtv] Re: White paper from CEA


> Al Limberg wrote:
>
> > Not so.  Every appliance has its own tuner at the
> > antenna.  But antenna elements are shared even if
> > they arecombined differently by each tuner.
>
> True enough. Actually, I was considering saying
> "either a dedicated antenna for each receiver, or
> multiple downleads, one dedicated to each receiver."
>
> But it still seems cumbersome, compared to being able
> to add receivers to the mix without having to go back
> to the masthead every time you do so.
>
> For apartment buildings, this could be impractical.
> But even in individual homes it can get clumsy, I
> think. Not something you'd want to do when you add
> a new box to your setup in late January in Minnesota,
> for example.
>
> I agree that in terms of SNR and easing the job of the
> receiver down below, a tuned antenna amp at the mast
> is a good idea. But I also think there are, as always,
> all those other considerations.
>
> Bert
>
>
>
> ----------------------------------------------------------------------
> You can UNSUBSCRIBE from the OpenDTV list in two ways:
>
> - Using the UNSUBSCRIBE command in your user configuration settings at
FreeLists.org
>
> - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
>
> ---
> [This E-mail scanned for viruses by Declude Virus]
>
>

---
[This E-mail scanned for viruses by Declude Virus]

 
 
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:

- Using the UNSUBSCRIBE command in your user configuration settings at 
FreeLists.org 

- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.

Other related posts: