I've got a dual 2.5 G5 with a 2.1TB XServe RAID, so I'm okay on the hardware side. For source material, I'd generate a Maya sequence to 1920x1080 resolution. I have a ready-to-go 1 minute sequence with test clips from Panasonic, so I'm just now rendering that out to H.264 at 1920x1080 at 15Mbps. On 10-Nov-05, at 7:29 AM, Craig Birkmaier wrote: > An interesting question. > > There is no interframe codec that will support 1920 x 1080@60P that I > am aware of, so you would need to use either uncompressed files or > some form of intraframe compression to lower the bit rate to storage. > > Today you can work with 1920 x 1080 sources in FCP, at multiple frame > rates. But I am not aware of any configuration that could actually > play 1080@60P at speed. Currently you need a top of the line G5 with > fiber channel arrays to support real time play out of 1920 x 1080@24P. > > The most common codec for HD quality source in FCP is the Panasonic > DVCPro HD codec that has a bitrate of 100 Mbps; this codec can > support 1920 x 1080 @30i/P. But most people are converting their HD > source to uncompressed when they are editing in FCP. > > So 1920 x 1080 x 60 = 1.24 billion samples per second to storage. If > each sample (Y, R-Y and B-Y) are 10 bits you are looking at something > in excess of 3 Gb per second for storage. With H.264 you may be able > to bring this down to a few hundred Mbps without any visible > artifacts, however I do not know if Apple will let you use the H.264 > codec at this level of resolution. > ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.