Craig Birkmaier wrote: > Where in Peter's blog did he advocate using LTE for data broadcasting? Where in my arguments do you see that I was only talking about data broadcasting? The arguments addressed all kinds of broadcasting, including, but not limited to, data files. In the article, he mentions how Verizon was going to create a form of broadcasting over its LTE network, for the TV streams. And then he talks about how ATSC is supposedly "inefficient" at this. (See my previous post for the exact quotes.) The two points are internally inconsistent. Not only that, but the idea of broadcasting over a cellular two-way network is not an innovation. He claimed that "first decade" technology didn't allow this. But it does. First of all, there have always been broadcast channels in 2G and 3G networks, even if these were not used to pass users' data. They are there as part of the signaling mechanism. So expanding on this concept should certainly not qualify as a big-deal innovation. But more applicably, using a 3G or 4G network to transmit IP multicasts is also not particularly innovative, and such multicasts also do not require repetition of every stream to every user. Search under MBMS. The standard has been available since 2004. It was designed for exactly the same applications that the article mentioned. And just because the letters "LTE" are involved, you shouldn't make the illogical leap that it must be more efficient than ATSC. The modulation per se is not "more efficient," and the extra baggage carried around, because this LTE network is actually a two-way network, further conspires to reduce the spectral effiency. Yes, ease of reception can probably be greater, but then again, if you deploy a dense network of low-powered TRANSLATORS for ATSC, similar to this LTE network but one-way broadcast only, you would likely see greater spectral efficiency and equal ease of reception as the LTE cell network. Bert ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.