[opendtv] Re: News: DIRECTV Sued Over HDTV Picture Quality

Just got my 18" E F lens on Ebay last friday. Building either a 720P
or 1080P LCD projector with it. The 720P is a 16:9 Samsung
HDTV/monitor so I will be able to compare which is the better way
since I will have both, HDTV that I can connect directly to TW or an
8-VSB STB or use it as a computer monitor connected to my PC with an
internal 8-VSB receiver. Fortunatley I have a number of both. The
1080P LCD screen I am still looking for. Would a WUXGA monitor work?

Bob Miller

On 9/26/06, Manfredi, Albert E <albert.e.manfredi@xxxxxxxxxx> wrote: 
Craig Birkmaier wrote:

>>> What is the relative cost of adding a computer and DVD
>>> drive to a display versus an ATSC/cable ready tuner?
>>
>> Something like 20:1.
>
> You've got to be kidding. Complete computers with LCD panel
> displays are selling for less than $500 today.
>
> A Mac mini retails for $599, and will connect directly to
> most HD displays via DVI (Apple is showed an HDMI connector
> on the iTV prototype that will retail for about $300).

Okay, so that $600 vs ~$30 for a built-in ATSC receiver, or 20:1 price
ratio.

> An HDTV capable iMAC (24" LCD panel) retails for $1,999,
> and it includes: a Superdrive that is capable of burning
> DVDs; a 250GB drive; 1 GB of memory; Wireless-G and
> Bluetooth; and a remote to run Apple's Front Row "lean back"
> interface. It has a 1920 x 1200 display resolution.

Subtract, what, $500 for the small display, and you're left with $1500
for the electronics. Compared with a built-in ATSC tuner, that's 50:1
price ratio.

Look at your question above. The answer is that all these admittedly
more potent options are far more expensive than the built-in
plug-and-play receiver. For the buck, the integrated TV gives you a lot
more than adding a computer, if what you're after is HDTV.

Bert


----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:

- Using the UNSUBSCRIBE command in your user configuration settings at 
FreeLists.org

- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.




----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:

- Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org 

- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.

Other related posts: