[opendtv] Re: DVB & MPEG-4 Part 10

Gary

   indeed this was the one for which i spent almost a day & tried to find
out but could not .....
   really thanks a lot once again.



warm regards,
Prashant Desai


----- Original Message ----- 
From: "Gary Sullivan" <garysull@xxxxxxxxxxxxxxxxxxxxx>
To: <opendtv@xxxxxxxxxxxxx>; <mp4-tech-bounces@xxxxxxxxxxxxxxxx>
Sent: Saturday, February 26, 2005 11:41 PM
Subject: [opendtv] Re: DVB & MPEG-4 Part 10


>
> I believe the DVB standards you are looking for are the recently-revised
> TS 101 154 and the new TS 102 005.
>
> Best Regards,
>
> Gary Sullivan
>
> +> -----Original Message-----
> +> From: opendtv-bounce@xxxxxxxxxxxxx=20
> +> [mailto:opendtv-bounce@xxxxxxxxxxxxx] On Behalf Of Prashant Desai
> +> Sent: Saturday, February 26, 2005 7:27 AM
> +> To: mp4-tech-bounces@xxxxxxxxxxxxxxxx; opendtv@xxxxxxxxxxxxx
> +> Subject: [opendtv] DVB & MPEG-4 Part 10
> +>=20
> +> Hello All=20
> +>  =20
> +> are there any standards released by DVB  for  MPEG-4 Part 10=20
> +>  or H.264 AVC  , coding standards ?=20
> +> if so then kindly point me to the relevent page .........if=20
> +> not then  How a service provider planning to provide=20
> +> services over H.264 AVC/MPEG-4 Part 10 will be able to=20
> +> provide the DTV services ?  i tried googling for an=20
> +> IRD  that can support MPEG-4 Part 10 but  could not locate=20
> +> it ........so does it mean that  one has to use=20
> +> transcoders that can transcode the DVB-MPEG-2 content=20
> +> received by the IRD supporting DVB/MPEG-2 [coz i could not=20
> +> locate the IRD product that supports MPEG-4 Part 10 coding] =20
> +> must be converted to MPEG-4 part 10 using the necessary=20
> +> transcoders   ? =20
> +>=20
> +>  How about  DVB-S2  ?  is it the DVB Standards that supports=20
> +> MPEG-4 Part 10 coding format ?   =20
> +>=20
> +>=20
> +>  pls advise=20
> +>=20
> +> regards,
> +> Prashant Desai=20
> +>=20
> +>=20
> +> =20
> +> =20
> +> -------------------------------------------------------------
> +> ---------
> +> You can UNSUBSCRIBE from the OpenDTV list in two ways:
> +>=20
> +> - Using the UNSUBSCRIBE command in your user configuration=20
> +> settings at FreeLists.org=20
> +>=20
> +> - By sending a message to: opendtv-request@xxxxxxxxxxxxx=20
> +> with the word unsubscribe in the subject line.
> +>=20
> +>=20
>
>
> ----------------------------------------------------------------------
> You can UNSUBSCRIBE from the OpenDTV list in two ways:
>
> - Using the UNSUBSCRIBE command in your user configuration settings at
FreeLists.org
>
> - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word
unsubscribe in the subject line.
>

 
 
----------------------------------------------------------------------
You can UNSUBSCRIBE from the OpenDTV list in two ways:

- Using the UNSUBSCRIBE command in your user configuration settings at 
FreeLists.org 

- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word 
unsubscribe in the subject line.

Other related posts: