According to the article that Dave posted, CMOS devices don't have a physical shutter, either. The way the image is clocked out of the device line by line while letting subsequent lines continue to gather light information is referred to as a "rolling shutter" and is the cause of wobble.
A quote:"A ROLLING SHUTTER is very different. The rolling shutter actually exposes different portions of the frame at different points in time, "rolling" through the frame. Again, it's not an actual physical moving shutter that's doing this (as opposed to a movie camera, which actually has a moving physical shutter). Instead, the sensor is telling different portions to become light-sensitive at different moments in time, and as this process proceeds down the course of the full frame, until the entire frame is exposed."
This to me sounds exactly the same as how a tube camera's electron beam scans the target and produces a signal. Hence Dave's question.
John----- Original Message ----- From: "Mark Schubin" <tvmark@xxxxxxxxxxxxx>
To: <opendtv@xxxxxxxxxxxxx> Sent: Wednesday, January 30, 2008 6:03 PM Subject: [opendtv] Re: CMOS sensors and rolling shutters
Tube cameras did not use shutters.Some CCD cameras did (and do). And skew and wobble may be seen on CCD cameras, too.TTFN, Mark
---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways:- Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org
- By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
