Sorry, I forgot the A-B switch. But at least that won't affect the performance of the CECB. I wouldn't try to mess with a "combiner" for all the reasons you mentioned. Thanks, Ken -----Original Message----- From: opendtv-bounce@xxxxxxxxxxxxx [mailto:opendtv-bounce@xxxxxxxxxxxxx] On Behalf Of John Shutt Sent: Wednesday, May 21, 2008 10:01 AM To: opendtv@xxxxxxxxxxxxx Subject: [opendtv] Re: CBA and Microprose team up on NTIA DTV Boxes ----- Original Message ----- From: "Hunold, Ken" <KRH@xxxxxxxxx> > If I "needed and desired" analog pass through, I could achieve that > using any CECB and a splitter. No need to design a new unit that > penalizes all viewers with the losses incurred by splitting the signal > inside the box. Tell me how to do that with a television with no line inputs, only RF input. There are more of those around than you might think. For that case, you need an RF splitter feeding the input to the CECB and one input of an A-B RF switch, and then you'd need the output of the CECB feeding the other side of the A-B switch. The output of the A-B switch would then feed the television. I suppose you could try to use a second RF splitter in reverse as a combiner, but then you'd have the RF channel 3 output of the CECB put back into the input of the CECB, and also radiated out of the antenna. As long as the channel 3 didn't sensitize the receiver front end, it might work. To watch off-air, you'd just turn off the CECB. John ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. ----------------------------------------- This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited. ---------------------------------------------------------------------- You can UNSUBSCRIBE from the OpenDTV list in two ways: - Using the UNSUBSCRIBE command in your user configuration settings at FreeLists.org - By sending a message to: opendtv-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.