[openbeosnetteam] Re: KDL trace...

Anybody have a link for how to setup the serial debugging (null or regular 
cable, speed, parity, commands, etc)?  I finally got Net+ to run during one 
session.  However, ssh, telnet and Beam and sent me to KDL.  It would be 
nice to capture some of this and see if I can figure out what's causing it. 
 :-)


On 2002-04-30 at 19:25:02 [-0500], openbeosnetteam@xxxxxxxxxxxxx wrote:
> This is still going on. Need to do more debugging in the morning.
> 
> address =        0, pc =        0, ps = 0x00000000 tmid = 2 thid = 330
> Lockikernel debugger: Welcome to Kernel Debugging Land...
>  eax 31bf808c  ebp fc027904  cs 0008 | area 00000000  (unmapped memory)
>  ebx 00000000  esp fc0278ec  ss 0010 | addr 00000000  size 00000000
>  ecx 00000000  edi fc027948  ds 0010 |
>  edx 31bf808c  esi 31bf3154  es 0010 | Thread: tulip0_rx_thread
>  eip 00000000 flag 00010202  fs 01db | Team:  kernel_team
> trap 0000000e  err 00000000  gs 0000 | Stack Trace follows:
> 
> 00000000  00000000
> fc027904  6035da96  _end+e252
> fc027910  603c45f8  _end+74db4
> fc027958  6038209e  _end+3285a
> fc02797c  6040f8a4  _end+455cc
> fc027998  60366364  _end+16b20
> address 6035da96:
>  area 05c847b8 (core_seg0) -- addr: 60357000, size: 00012000
>  offset:     6000
>  object: 05c7e878
>  pg: 0x4cd7
>  pte (11579d74): pa=06eba000, r=1, c=0, uw=10
>  frame: 0x6eba
> address 603c45f8:
>  area 05cb0698 (udp_seg0) -- addr: 603c3000, size: 00002000
>  offset:     1000
>  object: 05cb0358
>  pg: 0x4d71
>  pte (11579f10): pa=06f8d000, r=1, c=0, uw=10
>  frame: 0x6f8d
> 
> Something being called from core, by the udp module is causing it...

Other related posts: