[nvda] SV: Re: BRLTTY and NVDA

Hello!
Which protocol are you using with the brailliant?
You know that you can in the menu of the brailliant set it to act as a baum
handytech or powerbraill1 and powerbraille 2 display.
Actually i haven't tested yet but it might help you out.
/Anders.

-----Ursprungligt meddelande-----
Från: nvda-bounce@xxxxxxxxxxxxx [mailto:nvda-bounce@xxxxxxxxxxxxx] För
Valiant8086
Skickat: den 28 oktober 2008 13:14
Till: nvda@xxxxxxxxxxxxx
Ämne: [nvda] Re: BRLTTY and NVDA


Hi.
Ok I connected the brailliant 32 and did net stop brlapi. I got a 
confirmation that was telling me it was stopped. Net start brlapi after 
that, and it did say it was started. No braille though. Brailliant is 
connected via USB, and it is set to use the USB port, the brailliant is I 
mean. I haven't gotten to use it much, it's brand new. I've had it working 
with jaws some though. I installed the libusb win32 after I installed 
brltty. But I didn't start the brlapi till after that, when I stopped and 
started the service. To answer the question about which brltty I'm using, 
I'm useing the installer you made and linked to at the very beginning of 
this thread.
----- Original Message ----- 
From: "Valiant8086" <valiant8086@xxxxxxxxxxx>
To: <nvda@xxxxxxxxxxxxx>
Sent: Monday, October 27, 2008 8:08 AM
Subject: [nvda] Re: BRLTTY and NVDA


> Hi.
> I installed libusb win32 after installing brltty. I'll try net stop 
> and
> start when I get home where my displays are and see if that helps. thanks.
> ----- Original Message ----- 
> From: "James Teh" <jamie@xxxxxxxxxxx>
> To: <nvda@xxxxxxxxxxxxx>
> Sent: Monday, October 27, 2008 12:16 AM
> Subject: [nvda] Re: BRLTTY and NVDA
>
>
>> On 27/10/2008 2:10 PM, Valiant8086 wrote:
>>> I'm attempting to get a brailliant32 and a PACMate 40 to work with 
>>> this.
>> For the PacMate, you can just use NVDA's native Freedom Scientific
>> braille display driver, as long as you have the FS drivers installed.
>>
>>> I installed brltty, lybusb win32 filter.
>> How did you install BRLTTY? Did you use my BRLTTY installer or just 
>> the
>> zip archive? Note that using the zip archive and then install.bat is 
>> essentially the same as using the installer. Also note that you should 
>> have libusb-win32 installed *before* you start the BRLTTY service.
>>
>> Btw, you can start and stop the BRLTTY service as follows: net start 
>> brlapi net stop brlapi
>> You need to do this with admin privs.
>>
>>> I even found the
>>> brlapi installer inside the brltty program files folder and 
>>> installed it.
>> You only need to do this if you are running from source. The brlapi
>> Python bindings are included in the NVDA binary snapshots.
>>
>> Jamie
>>
>> --
>> James Teh
>> Email/MSN Messenger/Jabber: jamie@xxxxxxxxxxx
>> Web site: http://www.jantrid.net/
>> To post messages to the list send email to
>> nvda@xxxxxxxxxxxxx
>> To modify your NVDA Email settings go to:
>> http://www.freelists.org/list/nvda
>> Thank you for your continued support of Nonvisual Desktop Access, an open

>> source free screen reader for Microsoft Windows:
>> http://www.nvda-project.org/
>> To get the latest NVDA snapshot:
>> http://www.nvda-project.org/snapshots/
>> Report bugs or make feature requests at:
>> http://trac.nvda-project.org/
>> Message Archive:
>> http://www.freelists.org/archives/nvda
>>
>>
>> ---
>> avast! Antivirus: Inbound message clean.
>> Virus Database (VPS): 081026-0, 10/26/2008
>> Tested on: 10/27/2008 8:05:05 AM
>> avast! - copyright (c) 1988-2008 ALWIL Software. http://www.avast.com
>>
>>
>>
>
>
> To post messages to the list send email to
> nvda@xxxxxxxxxxxxx
> To modify your NVDA Email settings go to:
> http://www.freelists.org/list/nvda
> Thank you for your continued support of Nonvisual Desktop Access, an open 
> source free screen reader for Microsoft Windows:
> http://www.nvda-project.org/
> To get the latest NVDA snapshot:
> http://www.nvda-project.org/snapshots/
> Report bugs or make feature requests at:
> http://trac.nvda-project.org/
> Message Archive:
> http://www.freelists.org/archives/nvda
>
>
> ---
> avast! Antivirus: Inbound message clean.
> Virus Database (VPS): 081027-0, 10/27/2008
> Tested on: 10/27/2008 8:09:17 AM
> avast! - copyright (c) 1988-2008 ALWIL Software.
> http://www.avast.com
>
>
> 


To post messages to the list send email to
nvda@xxxxxxxxxxxxx
To modify your NVDA Email settings go to:
http://www.freelists.org/list/nvda
Thank you for your continued support of Nonvisual Desktop Access, an open
source free screen reader for Microsoft Windows:
http://www.nvda-project.org/
To get the latest NVDA snapshot:
http://www.nvda-project.org/snapshots/
Report bugs or make feature requests at:
http://trac.nvda-project.org/
Message Archive:
http://www.freelists.org/archives/nvda

To post messages to the list send email to
nvda@xxxxxxxxxxxxx
To modify your NVDA Email settings go to:
http://www.freelists.org/list/nvda
Thank you for your continued support of Nonvisual Desktop Access, an open 
source free screen reader for Microsoft Windows:
http://www.nvda-project.org/
To get the latest NVDA snapshot:
http://www.nvda-project.org/snapshots/
Report bugs or make feature requests at:
http://trac.nvda-project.org/
Message Archive:
http://www.freelists.org/archives/nvda

Other related posts: