Hi Hermann, On 29 Oct 2008 at 11:52, Hermann wrote: [Handytech devices not running with BRLTTY for windows] > > I have the same issue here but i have the whole driver installation > > of handytech installed on my system. > > brltty seems also not to work with the handy tech display. under > > linux it works. where do i have to enter the shortcut ht for the > > display so brltty knows which device i am using? > > > See the etc folder in your brltty main folder, which is located in > C:\Programme (in Standard installation). Seems not to work. it is also recognized by the libusb-win32 test program without any problem. I uncommented the line which is for the brltty handytech driver and it still doesn't show something on the display. tested with firmware mode or with eprom mode turned on. greetings, simon To post messages to the list send email to nvda@xxxxxxxxxxxxx To modify your NVDA Email settings go to: http://www.freelists.org/list/nvda Thank you for your continued support of Nonvisual Desktop Access, an open source free screen reader for Microsoft Windows: http://www.nvda-project.org/ To get the latest NVDA snapshot: http://www.nvda-project.org/snapshots/ Report bugs or make feature requests at: http://trac.nvda-project.org/ Message Archive: http://www.freelists.org/archives/nvda