try. install both if it helps. At 10:29 a.m. 28/10/2008, you wrote: >Hi, >after having set up NVDA with braile on my desktop machine, I tried to >install it on my laptop, where I only have an USB connection. >I installed libusb-win32 and tested the connection, everything OK. >I then installed brltty with no errors, brlapi started, but the first >problem here: I don't read the startup message. >Setting up NVDA's braille support results in not starting the display, >although there were no error messages. >Of course I edited brltty.conf with the parameters "al", "usb:" and "de" >as text table. >What may have caused this? Are there known issues with Alva Satellite >and USB? >May I install the libusb device driver instead of the filter? What's the >difference? The install procedure of the device driver sounds a bit >complicated, so is it necessary? >Hermann > >To post messages to the list send email to >nvda@xxxxxxxxxxxxx >To modify your NVDA Email settings go to: >http://www.freelists.org/list/nvda >Thank you for your continued support of Nonvisual Desktop Access, an open >source free screen reader for Microsoft Windows: >http://www.nvda-project.org/ >To get the latest NVDA snapshot: >http://www.nvda-project.org/snapshots/ >Report bugs or make feature requests at: >http://trac.nvda-project.org/ >Message Archive: >http://www.freelists.org/archives/nvda To post messages to the list send email to nvda@xxxxxxxxxxxxx To modify your NVDA Email settings go to: http://www.freelists.org/list/nvda Thank you for your continued support of Nonvisual Desktop Access, an open source free screen reader for Microsoft Windows: http://www.nvda-project.org/ To get the latest NVDA snapshot: http://www.nvda-project.org/snapshots/ Report bugs or make feature requests at: http://trac.nvda-project.org/ Message Archive: http://www.freelists.org/archives/nvda