I have to work tomorrow, but I am interested in the ethernet routers and the blades. On Thu, May 19, 2011 at 6:51 AM, Jim Willeke <jim@xxxxxxxxxxx> wrote: > We will be at the shop (next to our home) on Saturday, from 8-noon. > > 6571 Butler North-Liberty RD > Butler, OH 44822-9751 > > The CISCO routers are older, as I recall there are two Token-Ring and at > least one two-port ethernet router. > These were used for router and protocol analysis certifications and > explorations that we did sometime back. > > > -jim > Jim Willeke > > > > On Tue, May 17, 2011 at 5:33 PM, Ken Allen <kc8tdw@xxxxxxxxx> wrote: > >> Interested in the Cisco router and 5000 with blades. >> >> >> On Tue, May 17, 2011 at 10:18 AM, Jim Willeke <jim@xxxxxxxxxxx> wrote: >> >>> We have accumulated a large pile of computer and electronic equipment >>> that we no longer have any use for. >>> >>> Some computers and laptops in various working and non-working conditions. >>> >>> Some older CISCO routers and a CISCO 5000 chassis with several blades. >>> (These were pulled from a working environment a while back). >>> >>> We were just going to take them to the electronic recyclers, but I >>> thought if anyone on this list was interested you could come and take it >>> way. >>> >>> If interested, let me know and I will setup some time(s) on a weekend >>> that we will be around the shop. >>> >>> Free, but do not call me for help with any of it or if it does not work. >>> >>> -jim >>> Jim Willeke >>> >> >> >