> >5. Hold down the "form feed" button on the printer while you turn on the >printer. Does it print a test page after a while? > >Eric. Earlier today I figured the test procedure for the ImageW I must be the same as for the IW II. I did try it, about 6 lines of print came out then it stopped. Ususally I get tons with the IW II. I tried to get it to test print abt 10 more times, and nothing happened. I figure the printer is toast... perhaps fixable, but for now not working. Maybe the circuit board under the buttons is toast. From a quick once over that seems the problem. The board seems removable. Anyone have a spare, or parts unit ? Users can subscribe to the List by sending an email to <muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field Users can unsubscribe from the List by sending an email to <muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field Users must send messages or replies to <muglo@xxxxxxxxxxxxx> All messages are archived so that you can view them at any time by going to <//www.freelists.org/archives/muglo> Problems concerning use of the FreeList should be sent to <paulthomas@xxxxxxx> Don't forget to periodically check our web site at: http://muglo.on.ca/