[muglo] Update- another print cart ruined

I figured out why I couldnt refill the HP cart properly... I posted 
bf that when I tried, all the ink ran out the nozzle on the bottom.. 
tried taping it, but when I removed the tape the ink began leaking 
again.

Anyway, the 51633M cart is supposedly extremely difficult to refill 
(in my experience, yes, it is)... and it is recommended that a 
"refill clip" be used (instead of sticking the needle directly into 
the cartridge)... then air must be injected to maintain the right 
pressure inside the cart.

So... I now need to find a source for a refill kit that comes with a 
refill clip mechanism.

I bought 3 new cartridges (2 black, 1 colour), and really don;t want 
to ruin these.
I got the 3 carts for $45, so that's about the price of one black 
cart retail, but still, would rather not have to buy more.

(On a side note, I took back that awful Canon S200... decided my HP 
deskjet was better... it is faster and there's really not much of a 
difference in text quality. And the cartridges are twice as big, so 
there's less refill... also, of course, the HP is portable and runs 
off batteries, so that's plus)

regards,
~Alex


Users can subscribe to the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field

Users can unsubscribe from the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field

Users must send messages or replies to <muglo@xxxxxxxxxxxxx>

All messages are archived so that you can view them at any time by 
going to <http://www.freelists.org/archives/muglo>

Problems concerning use of the FreeList should be sent to 
<paulthomas@xxxxxxx>

Don't forget to periodically check our web site at:

                   http://muglo.on.ca/

Other related posts: