[muglo] Re: SCSI to USB with Ethernet

Have you tried using an ethernet connection?  Donna Haslehurst put me 
on to this about 1 1/2 years ago and I can assure you it's a lot 
easier than emailing.  You just get an ethernet cable and run it 
between the scsi and usb systems (assuming your scsi system has an 
ethernet port).  Then you set up Appletalk on both machines to 
transfer files.  It's relatively simple and painless and makes things 
a lot easier.  Many of the Mac self-help books explain how to setup 
such a connection.

>on 1/4/02 10:27 AM, Leith Peterson at lpeterso@xxxxxxxxxxxx wrote:
>
>>  I
>>  think it would be better to go the route of getting a new usb cpu,
>>  rather than investing in RAM on a scsi system.
>
>
>Yes I would think so after recently acquiring an iBook with 9.1 - the only
>problem then being that your peripherals may give a problem as I have heard
>that there can be problems using USB/SCSI converters - but I have no
>experience of this as I still use the 'old' computer for the peripherals -
>emailing the files from one computer to the other!!
>
>Paul
>


Users can subscribe to the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field

Users can unsubscribe from the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field

Users must send messages or replies to <muglo@xxxxxxxxxxxxx>

All messages are archived so that you can view them at any time by 
going to <http://www.freelists.org/archives/muglo>

Problems concerning use of the FreeList should be sent to 
<paulthomas@xxxxxxx>

Don't forget to periodically check our web site at:

                   http://muglo.on.ca/

Other related posts: