I do have a box of old speakers, some pc some mac - just have to figure out where to connect it to the logic boardg----- Original Message -----From: Dean Danis <dean_danis@xxxxxxxxxxx>Date: Friday, September 5, 2008 12:03 amSubject: [muglo] Re: Quicksilver won't boot - ideas?To: muglo@xxxxxxxxxxxxx> Hello Gord,> > That POST chime is an important diagnostic tool. Any way you can > connect a working speaker to the G4?> > ------------------------------------------------------------- > Dean Danis > > 90 Caprice Cr.> > London Ontario> > N5V 3M2> > 519-494-8639> > > From: gnickers@xxxxxx> > To: muglo@xxxxxxxxxxxxx> > Date: Thu, 4 Sep 2008 22:26:01 -0500> > Subject: [muglo] Quicksilver won't boot - ideas?> > > > I have a powermac G4 733 (quicksilver) model m8493 with > motherboard 820-1342-B (2001) in which the power light comes on > but then a red light at D55 on the logic board flashes and the > machine shuts down. I've changed the battery, ram, video card > and the hard disk. It looks like the motherboard?Any ideas - or > does someone have a quicksilver motherboard?BTW - I Can't listen > to the bootstrap chimes as there is no speaker!best -gord> > > > ---> > MUGLO information at <http://www.freewebs.com/muglo>> > Manage list subscription options at > <//www.freelists.org/list/muglo>> > > > > _________________________________________________________________> > > ---> MUGLO information at <http://www.freewebs.com/muglo>> Manage list subscription options at > <//www.freelists.org/list/muglo>> --- MUGLO information at <http://www.freewebs.com/muglo> Manage list subscription options at <//www.freelists.org/list/muglo>