[muglo] Re: Printer Problem

On 13-Jun-05, at 4:15 PM, Paul Thomas wrote:

> I found this but the Alignment prog didn't seem to work!!! Came up with
> a list of columns A to F and asked to select the flawed ones but no way
> of selecting!!   I opened up to see if any wires had come loose in the
> move but found none!!  So I give up - probably have to buy a new one -
> maybe another S300 as I have a couple of new colour cartridges!! -
> fortunately prices are not too bad these days - perhaps a sale will
> come on some time as I don't think it can be a software problem.
>
> At least I can still print in black.
> Paul
>

I have found Canon customer service email quite good in the past. I do 
have a very clean used Epson 777 available for $50.
TTFN,
TeeC

_________________________________________________

For information concerning the MUGLO List just click on

           http://muglo.on.ca/Pages/joinus.html

Our Archives can be viewed at 

         http://www.freelists.org/archives/muglo

Don't forget to periodically check our web site at:

                 http://muglo.on.ca/

Other related posts: