[muglo] Re: Printer Problem

I found this but the Alignment prog didn't seem to work!!! Came up with 
a list of columns A to F and asked to select the flawed ones but no way 
of selecting!!   I opened up to see if any wires had come loose in the 
move but found none!!  So I give up - probably have to buy a new one - 
maybe another S300 as I have a couple of new colour cartridges!! - 
fortunately prices are not too bad these days - perhaps a sale will 
come on some time as I don't think it can be a software problem.

At least I can still print in black.
Paul

On Jun 13, 2005, at 12:06 AM, Tee Cashmore wrote:

>
> On 12-Jun-05, at 8:53 PM, Paul Thomas wrote:
>
>>
>> It is a Cannon S300.   I used the Cannon Printer Utility using their
>> Test Page and Head Cleaning facility.  I also tried a new cartridge
>> with same result.  I tried pushing the USB connectors in case they
>> were loose but imagine if there was anything wrong there then the
>> Black would not have printed either!!
>>
>> Paul
>
> True. All I can think of then is that the print head of the colour cart
> is misaligned, which can happen in a move. Aligning the heads takes
> quite a bit of ink, but often cures the ills.
> TTFN,
> TeeC
>
> _________________________________________________
>
> For information concerning the MUGLO List just click on
>
>            http://muglo.on.ca/Pages/joinus.html
>
> Our Archives can be viewed at
>
>          http://www.freelists.org/archives/muglo
>
> Don't forget to periodically check our web site at:
>
>                  http://muglo.on.ca/
>
>

_________________________________________________

For information concerning the MUGLO List just click on

           http://muglo.on.ca/Pages/joinus.html

Our Archives can be viewed at 

         http://www.freelists.org/archives/muglo

Don't forget to periodically check our web site at:

                 http://muglo.on.ca/

Other related posts: