[muglo] Fwd: Scanner Software Solution!

Sorry!  I did find an answer to the problem.  I went into Adobe's 
Knowledge Base and it had an article dealing with this exact issue. 
Apparently Adobe Type Manager 4.0.5 which comes with Photodeluxe 2.0 
conflicts with OS9.  In fact, OS9 is incompatible with ATM 4.5.1 and 
earlier.  I have to upgrade to Adobe Photodeluxe 4.6.  You'd think 
they would have mentioned this in the general readmes, or even on the 
Photodeluxe 2.0 Top Issues web page, as this is a pretty big issue.

>Delivered-To: muglo@xxxxxxxxxxxxx
>X-Sender: b1rsej54@xxxxxxxxxxxxxxxxx (Unverified)
>Date: Thu, 24 Jan 2002 21:18:42 -0400
>To: MUGLO <muglo@xxxxxxxxxxxxx>
>From: Leith Peterson <lpeterso@xxxxxxxxxxxx>
>Subject: [muglo] Astra 3450 Scanner Software Problems
>X-archive-position: 226
>Sender: muglo-bounce@xxxxxxxxxxxxx
>X-original-sender: lpeterso@xxxxxxxxxxxx
>Reply-To: muglo@xxxxxxxxxxxxx
>
>
>If this problem has been covered on the list before, pls let me know
>and I'll check the archives.  I just got the above scanner recently
>and so wasn't paying much attention to the scanner posts in the past.
>
>I'm trying to install on an iBook running 9.0.4, 64 MB RAM.
>
>I've got a Umax Astra 3450 scanner, with software Adobe Photodeluxe
>2.0 and Astra Scanners 3.7.5 which came bundled with the scanner.
>I've checked the websites for both Umax and Adobe and I've got the
>latest version of the software.  I've also printed out every readme
>and help guide I can find and have read them through.
>
>The problem:  I've installed Adobe Photodeluxe and Adobe Type Manager
>with just CD and Memory enabled.  I did a custom install, as the
>version of Adobe Acrobat and QuickTime that came with the CD are
>older than what I have on my system.
>
>When I restart, I keep getting the error message, with a bomb icon:
>
>sorry a system error occurred
>~ATM error type 119
>restart with extensions off
>
>When I restart with extensions off, I don't get this error message.
>I've tried disabling various extensions and even tried changing the
>load order, same problem.  Even when I've tried just restarting with
>CD and Memory only, the same thing.
>
>Any suggestions?
>
>
>Users can subscribe to the List by sending an email to
><muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field
>
>Users can unsubscribe from the List by sending an email to
><muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field
>
>Users must send messages or replies to <muglo@xxxxxxxxxxxxx>
>
>All messages are archived so that you can view them at any time by
>going to <http://www.freelists.org/archives/muglo>
>
>Problems concerning use of the FreeList should be sent to
><paulthomas@xxxxxxx>
>
>Don't forget to periodically check our web site at:
>
>                    http://muglo.on.ca/



Users can subscribe to the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'subscribe' in the Subject field

Users can unsubscribe from the List by sending an email to 
<muglo-request@xxxxxxxxxxxxx> with 'unsubscribe' in the Subject field

Users must send messages or replies to <muglo@xxxxxxxxxxxxx>

All messages are archived so that you can view them at any time by 
going to <http://www.freelists.org/archives/muglo>

Problems concerning use of the FreeList should be sent to 
<paulthomas@xxxxxxx>

Don't forget to periodically check our web site at:

                   http://muglo.on.ca/

Other related posts: