[muglo] Re: Database Printing:

Hi once again Martin:
Thanxs again for your replies.

Now the rest of the story.

Aprox. 3  years ago I volunteered  to take over the membership 
position for a small
club, 360 members.
I was running 8.5 with A/W 6
I went to 9.2.2 and A/W 6.2.9
Then aprox. 6 to 8 mos. ago  went to Jag 10.2  and A/W 6.2.9.
I have always used the A/W database and always use List mode to print my lists.
Everthing has been perfect until two days ago while doing a printout 
of my list,
no horizontal or vertical lines.
My list has 13 fields and i use landscape  at 90 %  to print with 35 
lines to a page.
At first i though the cartridge (ink) had run out so I went to 
Staples and purchased a new one , installed it and still no lines or 
grid.
I see that A/W is coming out with  iWork perhaps to replace A/W????

Question do you use A/W or do you use Filemaker and does your DB grid 
show on printing? Perhaps I should go to Filemaker?

Thank you Tee, use  separate layouts.

john murdoch
_________________________________________________

For information concerning the MUGLO List just click on

           http://muglo.on.ca/Pages/joinus.html

Our Archives can be viewed at 

         http://www.freelists.org/archives/muglo

Don't forget to periodically check our web site at:

                 http://muglo.on.ca/

Other related posts: