Yes; but let me clarify something. During the install of moneyTalks, = there were a few files whose targets were newer than the files replacing = them so I said no to all. Could this be involved in the issue? Don -----Original Message----- From: moneytalks-bounce@xxxxxxxxxxxxx [mailto:moneytalks-bounce@xxxxxxxxxxxxx]On Behalf Of LARRY SKUTCHAN Sent: Monday, December 06, 2004 2:41 PM To: moneytalks@xxxxxxxxxxxxx Subject: [moneytalks] Re: Removing JAWS Hi Don. That is what we cannot reproduce. Does it work OK on your = system =3D if Money Talks is not involved? >>> Don.Barrett@xxxxxx Monday, December 06, 2004 2:27:09 PM >>> When I put jaws to sleep it works fine when waking up. When I actually = =3D =3D3D insert-f4 unload it, reloading it doesn't work after exiting MT. Since = =3D =3D3D putting it to sleep is easy enough, this isn't as big an issue as it = =3D3D could be, but it would be helpful to know why fully unloading jaws =3D3D affects its ability to restart. Don' -----Original Message----- From: moneytalks-bounce@xxxxxxxxxxxxx=3D20 [mailto:moneytalks-bounce@xxxxxxxxxxxxx]On Behalf Of LARRY SKUTCHAN Sent: Monday, December 06, 2004 2:07 PM To: moneytalks@xxxxxxxxxxxxx=3D20 Subject: [moneytalks] Removing JAWS We are trying to get a little more information about the problem of not = =3D =3D3D =3D3D3D being able to restart JAWS after removing it for use with Money Talks. = =3D =3D3D We =3D3D3D are not able to reproduce this problem here. Is there any additional = =3D3D =3D3D3D information any of you with this problem can provide us?