[modeleng] Re: voltage controll

Thanks Cliff,
I went through the with a fine tooth comb, but nothing usefull there.
maybe I missed some sites, if you have any suggestions I will  follow the up
thanks
Patrick
Clif Walker wrote:

>Hi,
>
>You could try prowling around some of the Electronic Circuit Web Sites on 
>the Internet.
>Some time ago I found some sites (mainly American ) that seemed to have 
>circuits for just about everything.
>
>Regards
>
>Clif
>----- Original Message ----- 
>From: "Patrick Coppens- Marian Lynch" <sb286643@xxxxxxxxx>
>To: <modeleng@xxxxxxxxxxxxx>
>Sent: Tuesday, March 27, 2007 4:21 PM
>Subject: [modeleng] voltage controll
>
>
>  
>
>>Evnin' All
>>
>>I my Workshop, I have a 3 phase (6,5KVA) diesel genset.
>>This provides the current for my (big ) lathe and a number of other 3
>>phase motors.
>>For the 3rd time the AVR (automatic voltage controller) has clapped out.
>>At 100 euro's a pop, yours truly is fed up.
>>I am an electronics engineer, so I can design/ make a more robust one
>>myself, but it would help to have a circuit diagram of one.
>>The commercial ones are embedded in a sort of gunk ,to protect them from
>>moisture and prying eyes like mine...
>>So it is impossible to get that stuff of, without totaly mangeling to
>>circuitboard.
>>I did that anway, only to find out, that most of the components have no
>>serial/type numbers
>>Even the resistors are not colorcoded!
>>Any body any ideas?
>>
>>Patrick
>>Flanders
>>MODEL ENGINEERING DISCUSSION LIST.
>>
>>To UNSUBSCRIBE from this list, send a blank email to,
>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>>line.
>>
>>
>>-- 
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.5.446 / Virus Database: 268.18.18/734 - Release Date: 
>>26/03/2007 14:31
>>
>>    
>>
>
>MODEL ENGINEERING DISCUSSION LIST.
>
>To UNSUBSCRIBE from this list, send a blank email to, 
>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
>
>  
>


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: