[modeleng] Re: voltage controll

Hi,

You could try prowling around some of the Electronic Circuit Web Sites on 
the Internet.
Some time ago I found some sites (mainly American ) that seemed to have 
circuits for just about everything.

Regards

Clif
----- Original Message ----- 
From: "Patrick Coppens- Marian Lynch" <sb286643@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Tuesday, March 27, 2007 4:21 PM
Subject: [modeleng] voltage controll


> Evnin' All
>
> I my Workshop, I have a 3 phase (6,5KVA) diesel genset.
> This provides the current for my (big ) lathe and a number of other 3
> phase motors.
> For the 3rd time the AVR (automatic voltage controller) has clapped out.
> At 100 euro's a pop, yours truly is fed up.
> I am an electronics engineer, so I can design/ make a more robust one
> myself, but it would help to have a circuit diagram of one.
> The commercial ones are embedded in a sort of gunk ,to protect them from
> moisture and prying eyes like mine...
> So it is impossible to get that stuff of, without totaly mangeling to
> circuitboard.
> I did that anway, only to find out, that most of the components have no
> serial/type numbers
> Even the resistors are not colorcoded!
> Any body any ideas?
>
> Patrick
> Flanders
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.18/734 - Release Date: 
> 26/03/2007 14:31
> 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: