[modeleng] Re: sanding belts

Got to go to the quack now, but I will check the catalog,and let you 
know something before the day ends
Patrick

Alan Stepney wrote:
> 'Twas I.
>
> The belt is 3" wide, by around 34" long. There is some adjustment, and I 
> believe that the maximum is 36" long, which would make sense.
> I could probably modify it to accept something slightly longer, may be even 
> up to 1 metre.
>
> http://www.alanstepney.info
> Alan Stepney's Model Engineering, steam, and workshop pages.
>
> ----- Original Message ----- 
> From: "Patrick Coppens-Marian Lynch" <develop@xxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Monday, September 24, 2007 2:26 PM
> Subject: [modeleng] sanding belts
>
>
> Gents,
>
> Some time ago (not so long), somebody had trouble finding the correct
> sanding belts, for an older machine (I believe it was that)
> As I couldn't say anything sensible about this problem, I didn't respond.
> This morning a brand new catalog, containing over 50 pages, nothing but
> abrasives of all sorts came in the post.
> If this member is still in difficulty,he can  let me know the parameters
> again, and I will see if there is something useful  in this new
> catalog,if he has found his abrasive feel free to ignore me... :-(
>
> Cheers
> Patrick
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
>   
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: