[modeleng] Re: sanding belts

'Twas I.

The belt is 3" wide, by around 34" long. There is some adjustment, and I 
believe that the maximum is 36" long, which would make sense.
I could probably modify it to accept something slightly longer, may be even 
up to 1 metre.

http://www.alanstepney.info
Alan Stepney's Model Engineering, steam, and workshop pages.

----- Original Message ----- 
From: "Patrick Coppens-Marian Lynch" <develop@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, September 24, 2007 2:26 PM
Subject: [modeleng] sanding belts


Gents,

Some time ago (not so long), somebody had trouble finding the correct
sanding belts, for an older machine (I believe it was that)
As I couldn't say anything sensible about this problem, I didn't respond.
This morning a brand new catalog, containing over 50 pages, nothing but
abrasives of all sorts came in the post.
If this member is still in difficulty,he can  let me know the parameters
again, and I will see if there is something useful  in this new
catalog,if he has found his abrasive feel free to ignore me... :-(

Cheers
Patrick

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: